Nissan 18201-5S700 Wire Assy-Accelerator

You can Select Your Vehicle to check if 18201-5S700 fits your vehicle.

To adjust the cruise control cable, follow these steps: Check Accelerator Cable Adjustment: First, ensure that the accelerator cable is properly adjusted. Start Moving Throttle Lever: Turn the adjusting nut until the throttle lever just starts to move. Back Off Adjusting Nut: Back off the adjusting nut 1/2 to 1 turn. Tighten Locknut: Tighten the locknut to secure the adjusting nut. Check Cruise Control Operation: Check that the cruise control system operates correctly after the adjustment.

After detaching the cable casing from the bracket, the next steps involve draining the transmission fluid, removing the fluid pan, and detaching the TV cable from its lever. Remove the bolt and detach the cable from the transmission. Finally, detach the cable adjuster from its bracket and remove the cable.

To adjust the accelerator cable, perform the following steps: Remove Slack: Lift up on the cable to remove any slack. Start Moving Throttle Lever: Turn the adjusting nut until the throttle lever just starts to move. Back Off Adjusting Nut: Back off the adjusting nut 1-1/2 to 2 turns. Tighten Locknut: Tighten the locknut to secure the adjusting nut in place. Check Throttle Valve Movement: Verify that the throttle valve opens fully when you depress the accelerator pedal to the floor and that it returns to the idle position when you release the accelerator.

With a ruler placed alongside the TV cable, measure the total stroke of the cable as your assistant depresses the throttle fully once again.