Nissan 50311-4S135 Engine Mounting Bracket Assembly, Left

You can Select Your Vehicle to check if 50311-4S135 fits your vehicle.

The two engine mounts are located on the passenger and driver's side of the vehicle.

They should be replaced immediately to prevent added strain on the driveline components, which could cause damage or wear.

Remove the bolts and nuts that attach the mount to both the cross member and the transmission. Then, raise the transmission slightly using the jack and remove the mount.

Raise the vehicle and support it securely on jackstands.

Installation is the reverse of removal, with the heat shields reinstalled over the top of each mount and thread locking compound used on the mount nuts before tightening them to the specific torque.

For replacement, start by disconnecting the cable from the negative terminal of the battery and setting the parking brake. Then, raise the front of the vehicle and support it securely on jackstands. Remove the splash shields from under the vehicle. Remove the engine mount-to-frame nuts, two on each side. In the engine compartment, remove the engine mount-to-engine mount bracket nut(s), one on each side. Attach an engine hoist to the top of the engine for lifting, making sure not to use a jack under the oil pan. Raise the engine slightly until the engine mount can be removed. To remove the engine mount brackets, detach the four retaining bolts securing the mount bracket to each side of the engine. Installation is the reverse of removal, applying thread locking compound to the mount nuts before tightening them to the specific torque.