Nissan 13020-96E10 CAMSHAFT

You can Select Your Vehicle to check if 13020-96E10 fits your vehicle.

Carefully pry out the camshaft oil seal without damaging the camshaft, and pull the camshaft out using a twisting motion.

The camshafts and lifters should always be thoroughly inspected before installation, and camshaft endplay should be checked prior to removal.

Inspect the contact and sliding surfaces of each lifter for wear and scratches. If the lifter pad is worn, it's advisable to check the corresponding camshaft lobe or adjusting shim on DOHC engines, as it will likely be worn too. Caution: On SOHC engines, do not lay the lifters on their side or upside down, as air can become trapped inside, requiring the lifter to be bled. Lifters can only be laid on their side if submerged in a pan of clean engine oil until reassembly.