Nissan 22448-JA00A Ignition Coil Assembly

You can Select Your Vehicle to check if 22448-JA00A fits your vehicle.

In 2.0 L engines, it is recommended to strip the engine cover and next, the intake manifold as the first step. Second, pull off the electrical connector of the coils you require through the access hole. Pull the coil mounting bolts, turn a little bit the coil counterclockwise and take it out. For installation reverse the removal process and also it is advisable to coat the inside part of the boots with silicone dielectric compound before fixing the ignition coils.

Remove the engine cover. If you're removing the coils from the right (rear) cylinder bank on a VG engine, remove the intake manifold collector (upper intake manifold). Disconnect the electrical connector from the coil(s). Press the tab and disconnect the electrical connector, then remove the coil mounting bolt. Remove the coil mounting bolt, then pull the coil straight out. Twist the coil, then lift it straight out. Installation is the reverse of the removal procedure. Before installing the ignition coils, coat the interior of the boots with silicone dielectric compound.