Contact Us: Live Chat or 1-888-726-6993
My Garage
My Account
My Cart
Make sure this part fits your vehicle

Nissan 14010-4S115 Collector-Intake Manifold

2002-2004 Nissan 140104S115

Nissan 14010-4S115 Collector-Intake Manifold
  • Part Description
    Collector-Intake Manifold
  • Lookup Code
    14013M
  • Manufacturer
    Nissan
Customer Questions & Answers
$332.26 MSRP: $443.02
You Save: $110.76 (26%)
1
ADD TO CART
Ships in 1-3 Business Days
  • Product Specifications

    BrandGenuine Nissan
    Lookup Code14013M
    Manufacturer Part Number14010-4S115
    Part DescriptionCollector-Intake Manifold
    Other NamesIntake Plenum
    Item Dimensions22.1 x 14.0 x 5.7 inches
    Item Weight11.30 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerNissan
    SKU14010-4S115
    WarrantyThis genuine Nissan part is guaranteed by Nissan's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Trim & Engine Important vehicle option details
    2002-2004 Nissan FrontierSE, XE|6 Cyl 3.3LVG33E
    2002-2004 Nissan XterraSE, XE|6 Cyl 3.3LVG33E

Customer Questions & Answers

Q:
Will this part fit my car? Posted by NissanPartsDeal Specialist
A:
You can Select Your Vehicle to check if 14010-4S115 fits your vehicle.
Posted by NissanPartsDeal Specialist
Q:
How do you remove the upper intake plenum, lower intake plenum, and intake manifold on 3.5L V6 Nissan Xterra? Posted by Customer
A:
Before removing the upper intake plenum, first, reduce fuel pressure and disconnect the battery. Then, remove the air intake duct and engine cover. Label and detach from hoses and electrical connectors connected to the plenum or throttle body. Through undoing the upper plenum bolts in reverse order, remove it together with its throttle body. For placing upper plenum into position after cleaning mounting surfaces and removing old gasket material. The bolts should be tightened accordingly using suggested sequence. Remove lower intake plenum including upper intake manifold, label and disconnect hoses and electrical connectors on them as well as remove plenum support brackets. In addition to that clean mounting surfaces install new gaskets and locate lower plenum on top of intake manifold while tightening bolts in them. Starting with upper intake plenum removing it from engine, labeling and detaching any remaining hoses followed by fuel rail with injectors release then all manifold mounting nuts/bolts should be unscrewed backwards following a gentle use of a scraper that clears away old gasket material. Clean exhaust manifolds before laying new gaskets in position on cylinder heads prior to tightening lock nuts in required order which is prescribed by manufacturer specifications for such engines. Finally, get running motor checked up for leaks firsthand before you finish working on it again without checking your work thoroughly first since you could miss something vital given how many minutes will go unnoticed till completion of whole process unless there's an error or two during installation not caught right away resulting eventual damage beyond repair causing further downtime later down line.
Posted by NissanPartsDeal Specialist
Q:
How do you remove the upper intake plenum, lower intake plenum, and intake manifold on 3.5L V6 Nissan Frontier? Posted by Customer
A:
Before removing the upper intake plenum, first, reduce fuel pressure and disconnect the battery. Then, remove the air intake duct and engine cover. Label and detach from hoses and electrical connectors connected to the plenum or throttle body. Through undoing the upper plenum bolts in reverse order, remove it together with its throttle body. For placing upper plenum into position after cleaning mounting surfaces and removing old gasket material. The bolts should be tightened accordingly using suggested sequence. Remove lower intake plenum including upper intake manifold, label and disconnect hoses and electrical connectors on them as well as remove plenum support brackets. In addition to that clean mounting surfaces install new gaskets and locate lower plenum on top of intake manifold while tightening bolts in them. Starting with upper intake plenum removing it from engine, labeling and detaching any remaining hoses followed by fuel rail with injectors release then all manifold mounting nuts/bolts should be unscrewed backwards following a gentle use of a scraper that clears away old gasket material. Clean exhaust manifolds before laying new gaskets in position on cylinder heads prior to tightening lock nuts in required order which is prescribed by manufacturer specifications for such engines. Finally, get running motor checked up for leaks firsthand before you finish working on it again without checking your work thoroughly first since you could miss something vital given how many minutes will go unnoticed till completion of whole process unless there's an error or two during installation not caught right away resulting eventual damage beyond repair causing further downtime later down line.
Posted by NissanPartsDeal Specialist
Q:
What other components should be removed before taking off the upper intake manifold for the 2001 Nissan Xterra? Posted by Customer
A:
Remove the spark plug wires and distributor cap.
Posted by NissanPartsDeal Specialist
Q:
What should be done after cleaning the mating surfaces for the 2002 Nissan Xterra? Posted by Customer
A:
Install a new gasket, then position the manifold on the cylinder head and install the nuts/bolts. Tighten the nuts/bolts in three or four equal steps to the specific torque. Follow the recommended tightening sequence.
Posted by NissanPartsDeal Specialist
Q:
What other components should be removed before taking off the upper intake manifold for the 2004 Nissan Frontier? Posted by Customer
A:
Remove the spark plug wires and distributor cap.
Posted by NissanPartsDeal Specialist
Q:
How should the old gasket material and sealant be removed for the 2004 Nissan Frontier? Posted by Customer
A:
Use a scraper to remove all traces of old gasket material and sealant from the manifold and cylinder head, then clean the mating surfaces with lacquer thinner or acetone.
Posted by NissanPartsDeal Specialist
If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Nissan Part 14010-4S115, the Right Choice

To ensure reliability, purchase Nissan part # 14010-4S115 Collector-Intake Manifold. It is sometimes referred to as Nissan Intake Manifold. OEM parts are the #1 choice in terms of quality. Crafted by Nissan, they follow rigorous factory specs and go through the demanding quality control processes during manufacturing. This part fits 2002-2004 Nissan Frontier, 2002-2004 Nissan Xterra.

NissanPartsDeal.com is a leading supplier of genuine Nissan parts and accessories such as Nissan 140104S115 Collector-Intake Manifold. Welcome to our vast selection of competitively-priced genuine Nissan parts available online. Each OEM Nissan part we provide is backed by a manufacturer's warranty and is subject to a stress-free return policy. Place your order now and receive your parts quickly, shipped directly to your doorstep.

Why choose Nissan Parts Deal

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly