Contact Us: Live Chat or 1-888-726-6993
My Garage
My Account
My Cart
Make sure this part fits your vehicle

Nissan 12201-1KC0A CRANKSHAFT Assembly

2011-2019 Nissan 122011KC0A

Nissan 12201-1KC0A CRANKSHAFT Assembly
  • Part Description
    CRANKSHAFT Assembly
  • Lookup Code
    12200
  • Manufacturer
    Nissan
Customer Questions & Answers
$1240.14 MSRP: $1653.52
You Save: $413.38 (25%)
1
ADD TO CART
Ships in 1-3 Business Days
  • Product Specifications

    BrandGenuine Nissan
    Lookup Code12200
    Manufacturer Part Number12201-1KC0A
    Part DescriptionCRANKSHAFT Assembly
    Other NamesCrankshaft
    Item Dimensions21.3 x 9.5 x 8.7 inches
    Item Weight25.90 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerNissan
    SKU12201-1KC0A
    WarrantyThis genuine Nissan part is guaranteed by Nissan's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Trim & Engine Important vehicle option details
    2011-2017 Nissan JukeBase, Luxury, Nismo, Nismors, S, SL, SV, Upper|4 Cyl 1.6LMR16DDT
    2016-2019 Nissan SentraNismo, SR|4 Cyl 1.6LMR16DDT

Customer Questions & Answers

Q:
Will this part fit my car? Posted by NissanPartsDeal Specialist
A:
You can Select Your Vehicle to check if 12201-1KC0A fits your vehicle.
Posted by NissanPartsDeal Specialist
Q:
How do you check the crankshaft endfloat and what steps should be taken if wear is detected on Nissan Juke? Posted by Customer
A:
To verify crankshaft endfloat, place the crankshaft in the cylinder block or crankcase but should be able to move back and forth. Ordinarily, a dial gauge touching the end of the crankshaft will be helpful, push it fully in one direction and zero the dial gauge then push the dial gauge fully in the opposite direction to measure the end float as this will determine if new thrust washers are required. Feelers can be used if a dial gauge is not available and it can measure the clearance between the No 4 crankpin web and No 3 main bearing thrustwasher, having pushed the crankshaft towards the flywheel end. Scrape clean with paraffin or choose an appropriate solvent while doing away with the crankshaft's use of compressed air and making certain that the oil holes are clear. Check the main and big-end bearing journals for wears, scoring, pitting and crack. Bearing wear on the big-end will result in metallic knocking and loss of oil pressure while in the main bearing, it results in severe vibration and rumble increasing with the increase in speeds and oil pressure loss. One should also examine the bearing journal for roughness, as any kind of roughness would mean that the journal needs to be reground or replaced. Check for wear on the flat contact surfaces of the oil seal, Deep scraper may need the service of a specialist to fix or warrant a replacement of the crankshaft. Crankshaft measurement should be accurate and this is a task that can only be done by the automotive engineering workshop, hence the appropriate journal bearings should be sourced from the same workshop in case of regrinding. After regrinding, examine case for burrs around the oil holes: if any, they should be scraped off and the entire area cleaned. This may be true only on desks stocks; if the crankshaft is worn out beyond the limit, and undersize bearings are not available, the crankshaft will have to be replaced; check with a Nissan dealer or an engine genius for the parts sizes.
Posted by NissanPartsDeal Specialist
Q:
What is the first step in preparing the bearing shells for the 2011 Nissan Juke? Posted by Customer
A:
Clean the backs of the bearing shells and the bearing locations in both the cylinder block and the main bearing caps.
Posted by NissanPartsDeal Specialist
Q:
How should the crankshaft be removed for the 2016 Nissan Juke? Posted by Customer
A:
Carefully lift out the crankshaft, ensuring the upper main bearing shells remain in place, then recover the upper bearing shells from the cylinder block and tape them to their respective caps.
Posted by NissanPartsDeal Specialist
If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Nissan Part 12201-1KC0A, the Right Choice

To ensure reliability, purchase Nissan part # 12201-1KC0A CRANKSHAFT Assembly. It is sometimes referred to as Nissan Crankshaft. OEM parts are the #1 choice in terms of quality. Crafted by Nissan, they follow rigorous factory specs and go through the demanding quality control processes during manufacturing. This part fits 2011-2017 Nissan Juke, 2016-2019 Nissan Sentra.

NissanPartsDeal.com is a leading supplier of genuine Nissan parts and accessories such as Nissan 122011KC0A CRANKSHAFT Assembly. Welcome to our vast selection of competitively-priced genuine Nissan parts available online. Each OEM Nissan part we provide is backed by a manufacturer's warranty and is subject to a stress-free return policy. Place your order now and receive your parts quickly, shipped directly to your doorstep.

Why choose Nissan Parts Deal

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly