Nissan 30610-9Z400 Cylinder Assy-Clutch Master

You can Select Your Vehicle to check if 30610-9Z400 fits your vehicle.

Begin by suctioning fluid from the reservoir. Disconnect the hydraulic line, remove the under-dash panel, and pull out the clevis pin. Remove the master cylinder mounting nuts and detach from the firewall. Replace the reservoir, drive out the roll pin, and pry out the old seal. Install the new seal, lubricate with brake fluid, and press the reservoir into place. Install the new roll pin, refill the reservoir, check for leaks, and bleed the system.

To remove the clutch master cylinder, follow these steps: Remove the master cylinder mounting nuts. Detach the master cylinder from the firewall.