Nissan H0600-3J185 Cylinder Assy-Door Lock

You can Select Your Vehicle to check if H0600-3J185 fits your vehicle.

To detach the door latch and, if equipped, the door lock solenoid, follow the steps mentioned above to remove the latch retaining screws and release the latch from the control rods. Then, disconnect the electrical connector for power door locks. The installation process is the reverse of removal.

To remove the outside handle, disconnect the control link rod from the outside handle. Then, remove the outside handle retention nuts and pull the handle from the door. On front doors, the outside handle retaining nuts can be accessed through the holes in the door frame. On vehicles with rear doors, pry out the trim caps to access the outside handle retaining nuts. The installation process is the reverse of removal.

According to the supplied VIN, PN: H0600-3J185 is correct. This is a door lock cylinder with key that is cut specifically to the cylinder.