Contact Us: Live Chat or 1-888-726-6993
My Garage
My Account
My Cart
Make sure this part fits your vehicle

Nissan 85022-2Y925 Rear Bumper Cover

2000-2003 Nissan Maxima 850222Y925

Nissan 85022-2Y925 Rear Bumper Cover
  • Part Description
    Fascia Kit-Rear Bumper
  • Lookup Code
    85010S
  • Position
    Rear
  • Replaces
    85022-2Y940
  • Manufacturer
    Nissan
Customer Questions & Answers
$148.33 MSRP: $215.75
You Save: $67.42 (32%)
1
ADD TO CART
Ships in 1-3 Business Days
  • Product Specifications

    BrandGenuine Nissan
    Lookup Code85010S
    Manufacturer Part Number85022-2Y925
    Part DescriptionFascia Kit-Rear Bumper
    Other NamesBumper Cover
    Manufacturer NoteNO PAINTING
    Item Dimensions79.0 x 40.2 x 17.3 inches
    Item Weight23.00 Pounds
    PositionRear
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces85022-2Y940
    ManufacturerNissan
    SKU85022-2Y925
    WarrantyThis genuine Nissan part is guaranteed by Nissan's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Trim & Engine Important vehicle option details
    2000-2003 Nissan MaximaGLE, GXE, GXEL, SE, SEL, SES|6 Cyl 3.0L, 6 Cyl 3.5LVQ30DE, VQ35DE

Customer Questions & Answers

Q:
I want to make sure this part fits my car Posted by NissanPartsDeal Specialist
A:
You can Select Your Vehicle to check if 85022-2Y925 fits your vehicle.
Posted by NissanPartsDeal Specialist
Q:
How do you remove and install the front and rear bumpers for Nissan Maxima? Posted by Customer
A:
First, set the parking brake, then lift the car and secure it with jackstands; Make sure that the parking brake is engaged before lifting the vehicle and placing it chocks on jackstands. Remove the cable by pulling on theclamp and unscrew any further connectors to the negative terminal of the battery that might hinder the bumper extraction process. For makes of models prior 2003, peel off the splash panel at the lower part of the car, beneath the radiator and bumper, then the radiator grille, headlight shells, turn signal lamps and cornering lamps. Subsequently, it is time to remove the headlights and cornering lamps and to disarm the last fasteners that make the fastening of the bumper cover and contuse that the fenders and the cover itself were not damaged. At the vehicle side, the bolts of the front bumper beam bracket need to be loosened and thereby extricated from the chassis; in addition, the entire bumper assembly needs to be disconnected from the vehicle. For 2004 and later models, begin by taking off the grille, and the screws found on the under part of the bumper fascia; after that, you will release the inner fender to the fascia. Unbolt the side and front covers that are located under the engine and draw the bumper fascia away from the vehicle, also unscrew the electrical connectors that are situated between the bumper fascia and all the lights and finally, pull the foam pad from the front portion of the reinforcing bar. Remove the AHered temperature sensor if installed, remove the reinforcing bar from the brackets, and remove the bumper brackets if necessary. On 2003 and earlier models, go to the rear to uninstall the fasteners under the car in the bottom of the rear bumper fascia area and under the license plate area, and open the trunk to remove the trim which would expose the upper part of the mounting bolts. If necessary there is an easy access to the rear bumper beam, and that is to remove the mounting bolts, and the rear bumper beam also comes off. For 2004 and later models, take off the rear trim panel inside the boot, then you will see the mounting nuts of the rear combination lamps, disconnect the lamps connectors and then take off the lamps. Last, and place the bumper fascia to the vehicle Sf, unscrew every trim clip that attaches the bumper fascia to the vehicle , and then released the foam from the bumper reinforcing bar before you will loosen the mounting nut. Installation essentially involves the activities that are considered to be the reverse of the removal activities.
Posted by NissanPartsDeal Specialist
If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Nissan Part 85022-2Y925, the Right Choice

To ensure reliability, purchase Nissan part # 85022-2Y925 Rear Bumper Cover. It is sometimes referred to as Nissan Bumper. OEM parts are the #1 choice in terms of quality. Crafted by Nissan, they follow rigorous factory specs and go through the demanding quality control processes during manufacturing. This part fits 2000-2003 Nissan Maxima.

NissanPartsDeal.com is a leading supplier of genuine Nissan parts and accessories such as Nissan 850222Y925 Rear Bumper Cover. Welcome to our vast selection of competitively-priced genuine Nissan parts available online. Each OEM Nissan part we provide is backed by a manufacturer's warranty and is subject to a stress-free return policy. Place your order now and receive your parts quickly, shipped directly to your doorstep.

Why choose Nissan Parts Deal

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly