Nissan 90606-01G01 Tailgate Handle

You can Select Your Vehicle to check if 90606-01G01 fits your vehicle.

By opening the tailgate, you will have to unscrew the screws of the tailgate access cover and then remove it. After that, move around the plastic clips which holds the control rods from underneath them, lifting these rods off the handle. During this process, we need to remove the control rods and the handle mounting bolts on its end. For you to take off handle, you must simply release tailgate by taking off its bolts. Thereafter, detach it from inside of tailgate alongside central locking mechanism through withdrawing bolts and yanking away rod connected to it. That is how one goes about removing a tailgate latch by lifting out with control rod. Mounting is done as in removal above. Tighten all fasteners securely enough after reinstallation.

To remove the door trim panel and plastic water-shield, you need to first detach the latch retaining screws from the end of the door. Then, reach inside the door to release the latch from the control rods. If there is a door stiffening brace, remove it to access the rear of the latch. Finally, if your vehicle has power door locks, disconnect the electrical connector.