Nissan 46210-ET81A Hose Assembly-Brake, Rear

You can Select Your Vehicle to check if 46210-ET81A fits your vehicle.

1. Loosen the wheel lug nuts and raise the vehicle securely on jackstands. 2. Remove the wheel. 3. Unscrew the brake line fitting from the hose at the bracket. 4. If it's a front hose, also remove the U-clip from the threaded fitting on the brake line. 5. Pass the hose through the bracket and remove the banjo bolt at the caliper end. 6. If it's a front hose, remove the U-clip from the strut bracket and detach the hose. 7. To install the new hose, pass the caliper fitting end through the strut bracket (for front hose) and connect it to the caliper with the banjo bolt and new sealing washers. 8. Make sure the hose isn't twisted between the caliper and the strut bracket (or chassis for rear brake hoses). 9. Route the hose into the frame bracket, ensuring it isn't twisted, and connect the brake line fitting securely. 10. Bleed the caliper, install the wheel, lower the vehicle, and tighten the lug nuts to the specified torque.