Nissan 40202-AL510 Hub Assembly-Road Wheel,Front

You can Select Your Vehicle to check if 40202-AL510 fits your vehicle.

Loosen the wheel lug nuts, raise the front of the vehicle and support it securely on jackstands placed under the frame rails. Remove the wheel, brake disc and the ABS wheel speed sensor (if equipped). On AWD models, remove the driveaxle/hub nut and loosen the driveaxle from the hub splines. Remove the hub and wheel bearing mounting fasteners. Remove the hub from the steering knuckle. Be careful not to damage the small plastic cover in the rear of the hub, if equipped. Installation is the reverse of removal, noting to tighten the brake caliper mounting bracket and brake caliper mounting bolts to the torque, tighten the hub mounting fasteners to the torque, install the wheel, lower the vehicle and tighten the lug nuts to the torque and on AWD models, tighten the driveaxle/hub nut to the torque.

Push the driveaxle through the hub splines, creating enough space to reach the hub and wheel bearing mounting bolts located on the back of the knuckle.