Contact Us: Live Chat or 1-888-726-6993
My Garage
My Account
My Cart
Make sure this part fits your vehicle

Nissan 16600-1B000 Injector Assy-Fuel

1995-2000 Nissan 166001B000

Nissan 16600-1B000 Injector Assy-Fuel
  • Part Description
    Injector Assy-Fuel
  • Lookup Code
    16603
  • Replaced By
    16600-9S200
  • Manufacturer
    Nissan
Customer Questions & Answers
$140.14 MSRP: $202.75
You Save: $62.61 (31%)
1
ADD TO CART
  • Product Specifications

    BrandGenuine Nissan
    Lookup Code16603
    Manufacturer Part Number16600-1B000
    Part DescriptionInjector Assy-Fuel
    Item Dimensions3.0 x 1.5 x 1.4 inches
    Item Weight0.60 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    Require Quantity6
    ManufacturerNissan
    SKU16600-1B000
    WarrantyThis genuine Nissan part is guaranteed by Nissan's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Trim & Engine Important vehicle option details
    1998-2000 Nissan FrontierSE, XE|6 Cyl 3.3LVG33E
    1996-2000 Nissan PathfinderLE, SE, XE|6 Cyl 3.3LVG33E
    1995-2000 Nissan QuestGXE, SE, XE|6 Cyl 3.0L, 6 Cyl 3.3LVG30E, VG33E
    2000 Nissan XterraSE, XE|6 Cyl 3.3LVG33E

Customer Questions & Answers

Q:
Will this part fit my car? Posted by NissanPartsDeal Specialist
A:
You can Select Your Vehicle to check if 16600-1B000 fits your vehicle.
Posted by NissanPartsDeal Specialist
Q:
How to service fuel injectors and Fuel Rail on a Nissan Quest? Posted by Customer
A:
The fuel injectors on the front bank can be serviced without removing the upper intake manifold. However, servicing the fuel injectors on the rear bank requires removal of the upper intake manifold. It is not necessary to remove the fuel rail if you're only servicing a fuel injector. Fuel injectors can be removed without detaching the fuel rail. First, relieve the fuel pressure. Then, disconnect the cable from the negative terminal of the battery. Remove the air intake plenum (upper intake manifold) from the lower intake manifold. Disconnect the fuel injector connectors. If servicing of the fuel injector(s) is necessary, remove the injector cap screws and cap, then pull the injector(s) from the fuel rail cup. Inspect the injector 0-rings (three per injector) for signs of deterioration. Replace as required. Lubricate the new 0-rings with light grade oil. Do not use silicone grease. It will clog the injectors. Using a light twisting motion, install the injector(s) into the fuel rail cup. Ensure that the injector caps are clean and free of contamination and tighten the cap screws. If removal of the fuel rail assembly is necessary, disconnect the fuel feed and return lines then remove the fuel rail retaining bolts (two on each side). Using a rocking, side to side motion, carefully lift the fuel rail and the fuel injectors as an assembly from the lower intake manifold. Installation is the reverse of removal with the following exceptions: Inspect the fuel rail insulators (one per injector) for signs of deterioration and replace as required. Install the fuel rail insulators into the lower Intake manifold and lubricate them with a light coat of oil before installing the fuel rail assembly onto the lower intake manifold.
Posted by NissanPartsDeal Specialist
Q:
How do you remove the fuel rail assembly from the lower intake manifold for the 2001 Nissan Pathfinder? Posted by Customer
A:
Remove the fuel rail retaining bolts. Carefully lift the fuel rail and the fuel injectors as an assembly from the lower intake manifold.
Posted by NissanPartsDeal Specialist
See expert answers on similar Fuel Injector
Q:
How do you complete the reinstallation of the fuel rail assembly onto the lower intake manifold for the 1999 Nissan Frontier? Posted by Customer
A:
Install the fuel rail onto the lower intake manifold and tighten the bolts to the specified torque.
Posted by NissanPartsDeal Specialist
See expert answers on similar Fuel Injector
Q:
How do you remove the fuel rail assembly from the lower intake manifold for the 2000 Nissan Xterra? Posted by Customer
A:
Remove the fuel rail retaining bolts. Carefully lift the fuel rail and the fuel injectors as an assembly from the lower intake manifold.
Posted by NissanPartsDeal Specialist
See expert answers on similar Fuel Injector
If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Nissan Part 16600-1B000, the Right Choice

To ensure reliability, purchase Nissan part # 16600-1B000 Injector Assy-Fuel. It is sometimes referred to as Nissan Fuel Injector. OEM parts are the #1 choice in terms of quality. Crafted by Nissan, they follow rigorous factory specs and go through the demanding quality control processes during manufacturing. This part fits 1998-2000 Nissan Frontier, 1996-2000 Nissan Pathfinder, 1995-2000 Nissan Quest, 2000 Nissan Xterra.

NissanPartsDeal.com is a leading supplier of genuine Nissan parts and accessories such as Nissan 166001B000 Injector Assy-Fuel. Welcome to our vast selection of competitively-priced genuine Nissan parts available online. Each OEM Nissan part we provide is backed by a manufacturer's warranty and is subject to a stress-free return policy. Place your order now and receive your parts quickly, shipped directly to your doorstep.

Why choose Nissan Parts Deal

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly