Nissan 11220-4W000 Engine Mounting Insulator, Front

You can Select Your Vehicle to check if 11220-4W000 fits your vehicle.

The engine mount-to-frame bolts and the engine mount-to-mount bracket retaining nut should be removed, and an engine hoist should be attached to the top of the engine for lifting. The engine should be slightly raised until the engine mount can be removed from the vehicle.

For replacement, start by disconnecting the cable from the negative terminal of the battery and setting the parking brake. Then, raise the front of the vehicle and support it securely on jackstands. Remove the splash shields from under the vehicle. Remove the engine mount-to-frame nuts, two on each side. In the engine compartment, remove the engine mount-to-engine mount bracket nut(s), one on each side. Attach an engine hoist to the top of the engine for lifting, making sure not to use a jack under the oil pan. Raise the engine slightly until the engine mount can be removed. To remove the engine mount brackets, detach the four retaining bolts securing the mount bracket to each side of the engine. Installation is the reverse of removal, applying thread locking compound to the mount nuts before tightening them to the specific torque.

Support the transmission with a floor jack. Place a block of wood on the jack head to act as a cushion.