Nissan 11320-8Y100 Engine Mounting, Rear

You can Select Your Vehicle to check if 11320-8Y100 fits your vehicle.

For replacement, disconnect the cable from the negative battery terminal, set the parking brake, block the rear wheels, raise the front of the vehicle, and support it securely on jackstands. Remove the splash shields and, if applicable, disconnect the wiring harness for the electronically controlled engine mount. Position a floor jack under the transaxle case with a wood block in between, then remove the through-bolts from the front and rear mounts, detach the crossmember from the vehicle, and remove the mount-to-engine bracket through-bolts.

Installation is the reverse of removal, with bolts tightened to specifications only after the powertrain weight is back on the mounts. For final tightening, ensure the vehicle is level and the engine weight is on the mounts, using thread-locking compound on the nuts/bolts and ensuring bushings are not twisted or offset.