Contact Us: Live Chat or 1-888-726-6993
×
Search Bar
Search by Part Number, Part Name, Description
My Garage
My Account
My Cart
Make sure this part fits your vehicle

Nissan 13231-V5004 Lifter-Valve

1984-2003 Nissan 13231V5004

Nissan 13231-V5004 Lifter-Valve
Nissan 13231-V5004 Lifter-Valve
Nissan 13231-V5004 Lifter-Valve
Nissan 13231-V5004 Lifter-Valve
  • Part Description
    Lifter-Valve
  • Lookup Code
    13231
  • Replaced By
    13231-V5005
  • Manufacturer
    Nissan
Customer Questions & Answers
$30.40 MSRP: $40.53
You Save: $10.13 (25%)
1
ADD TO CART

13231-V5004 Lifter-Valve is Lookup Code 13231 in the diagram below

1987 Nissan Maxima Lifter-Valve Diagram for 13231-V5004
The diagram listed above is for your reference. View diagram for your vehicle

Related Parts

  • Product Specifications

    BrandGenuine Nissan
    Lookup Code13231
    Manufacturer Part Number13231-V5004
    Part DescriptionLifter-Valve
    Item Dimensions4.2 x 2.0 x 1.0 inches
    Item Weight0.60 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    Require Quantity12
    ManufacturerNissan
    SKU13231-V5004
    WarrantyThis genuine Nissan part is guaranteed by Nissan's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65

  • Vehicle Fitment

    Year Make Model Trim & Engine Important vehicle option details
    1986-1988 Nissan 200SXSGL|6 Cyl 3.0LVG30E
    1984-1989 Nissan 300ZXGL, GLL, SF, SS|6 Cyl 3.0LVG30, VG30T
    1986-1994 Nissan Hardbody Pickup (D21)DX, GST, ST|6 Cyl 3.0LVG30, VG30E
    1995-1997 Nissan Hardbody Pickup (D21U)Long Body SE, Long Body XE|6 Cyl 3.0LVG30E
    1985-1994 Nissan MaximaDX, GXE, SE, SL/GL|6 Cyl 3.0LVG30E
    1987-2003 Nissan PathfinderLE, SE, ST, XE|6 Cyl 3.0L, 6 Cyl 3.3LVG30E, VG30I, VG33E
    1993-1998 Nissan QuestGXE, XE|6 Cyl 3.0LVG30E

Customer Questions & Answers

Q:
Will this part fit my car? Posted by NissanPartsDeal Specialist
A:
You can Select Your Vehicle to check if 13231-V5004 fits your vehicle.
Posted by NissanPartsDeal Specialist
Q:
What is the procedure for securing the camshaft after installation for the 1997 Nissan Quest? Posted by Customer
A:
Install the camshaft thrust plate and retaining bolt, tightening it to the specified torque.
Posted by NissanPartsDeal Specialist
See expert answers on similar Lash Adjuster
Q:
How should the camshaft bearing caps be removed for the 2002 Nissan Pathfinder? Posted by Customer
A:
Mark the camshaft bearing caps from 1 to 4, and with an "I" or an "E" to indicate intake or exhaust. Also, mark arrows indicating the front of the engine. Loosen the camshaft bearing caps in two or three steps, in the reverse order of the tightening sequence. Remove the bearing caps and the camshafts.
Posted by NissanPartsDeal Specialist
Q:
What should be visually checked on the camshaft bearing surfaces for the 1999 Nissan Quest? Posted by Customer
A:
Visually check for pitting, score marks, galling, and abnormal wear. If any damage is found, the cylinder head must be replaced.
Posted by NissanPartsDeal Specialist
Q:
What should you do with the camshaft sprocket bolts for the 2002 Nissan Pathfinder? Posted by Customer
A:
Loosen the camshaft sprocket bolts while holding the sprockets in place with a wrench, ensuring they remain aligned with the "TDC" marks on the crankshaft pulley.
Posted by NissanPartsDeal Specialist
See expert answers on similar Lash Adjuster
Q:
How do you remove the camshafts for the 2004 Nissan Pathfinder? Posted by Customer
A:
To remove the camshafts, remove the cylinder heads and gently pry off the camshaft cover plate. Use holding lugs to secure the camshaft while loosening the retaining bolt, and remove the bolt and thrust plate. Carefully pry out the camshaft oil seal without scratching or nicking the camshaft. Pull the camshaft out of the cylinder head using a twisting motion.
Posted by NissanPartsDeal Specialist
Q:
What should be examined in terms of lifter bore diameters and lifter-to-guide clearances during inspection for the 2004 Nissan Pathfinder? Posted by Customer
A:
When inspecting, examine lifter bore diameters and lifter-to-guide clearances, comparing the results to specifications. If bore wear exceeds specified limits, replace lifter guide assemblies (3.3L engines) or cylinder heads (2.4L and 3.5L engines).
Posted by NissanPartsDeal Specialist
Q:
What is the final step after completing the inspection for the 1988 Nissan 300ZX? Posted by Customer
A:
Place the lifters back in their respective bores, and install the rocker arm shaft assemblies and the rocker arm covers.
Posted by NissanPartsDeal Specialist
See expert answers on similar Lash Adjuster
Q:
How is the clearance for lifters computed for the 1986 Nissan 300ZX? Posted by Customer
A:
Subtract the outside diameter of each lifter from the inside diameter of its lifter bore and compare the difference to the specified clearance. If both are within acceptable limits, this measurement should also fall within tolerance.
Posted by NissanPartsDeal Specialist
Q:
What should be checked regarding the lifter bore diameter for the 2008 Nissan Maxima? Posted by Customer
A:
Check each lifter bore diameter and compare the results to the specifications in this Chapter. If any lifter bore is worn beyond the specified limit, the lifter guide assembly (for SOHC engines) or the cylinder head (for DOHC engines) must be replaced.
Posted by NissanPartsDeal Specialist
Q:
What should be checked with the lifters in their bores for the 2008 Nissan Maxima? Posted by Customer
A:
With the lifter in its bore, push down on the plunger at the top; if it moves more than 0.040-inch (1 mm), air may be trapped inside.
Posted by NissanPartsDeal Specialist
See expert answers on similar Lash Adjuster
Q:
What should be done with the timing chains and camshaft sprockets for the 1996 Nissan Maxima? Posted by Customer
A:
Next, remove the timing chains and camshaft sprockets. For 2004 and later models, unbolt the camshaft position sensor from the rear end of each cylinder bank if necessary, ensuring the working end of the sensor does not touch metal after removal.
Posted by NissanPartsDeal Specialist
If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Nissan Part 13231-V5004, the Right Choice

To ensure reliability, purchase Nissan part # 13231-V5004 Lifter-Valve. It is sometimes referred to as Nissan Lash Adjuster. OEM parts are the #1 choice in terms of quality. Crafted by Nissan, they follow rigorous factory specs and go through the demanding quality control processes during manufacturing. This part fits 1986-1988 Nissan 200SX, 1984-1989 Nissan 300ZX, 1985-1994 Nissan Maxima, 1987-2003 Nissan Pathfinder.

NissanPartsDeal.com is a leading supplier of genuine Nissan parts and accessories such as Nissan 13231V5004 Lifter-Valve. Welcome to our vast selection of competitively-priced genuine Nissan parts available online. Each OEM Nissan part we provide is backed by a manufacturer's warranty and is subject to a stress-free return policy. Place your order now and receive your parts quickly, shipped directly to your doorstep.

Why choose Nissan Parts Deal

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly