Nissan A2010-38U10 Piston,W/PIN

You can Select Your Vehicle to check if A2010-38U10 fits your vehicle.

Loosen each of the connecting rod cap nuts 1/2-turn at a time until they can be removed by hand. Remove the number one connecting rod cap and bearing insert, being careful not to drop the bearing insert out of the cap.

The connecting rods should be checked for cracks and other damage by temporarily removing the rod caps, lifting out the old bearing inserts, and inspecting the rod and cap bearing surfaces for nicks, gouges, and scratches. After inspection, the old bearings should be replaced, and the caps should be tightened finger tight. If the engine is being rebuilt due to a connecting rod knock, new or rebuilt rods should be installed.

Position the piston ring gaps at the specified intervals around the piston.