Contact Us: Live Chat or 1-888-726-6993
My Garage
My Account
My Cart
Make sure this part fits your vehicle

Nissan 12303-3S500 Pulley-Crankshaft

1998-2004 Nissan 123033S500

Nissan 12303-3S500 Pulley-Crankshaft
  • Part Description
    Pulley-Crankshaft
  • Lookup Code
    12303
  • Replaced By
    12303-9WA0A
  • Manufacturer
    Nissan
  • Manufacturer's Notes
    This part is discontinued.
Customer Questions & Answers
  • Product Specifications

    BrandGenuine Nissan
    Lookup Code12303
    Manufacturer Part Number12303-3S500
    Part DescriptionPulley-Crankshaft
    Item Dimensions6.2 x 6.2 x 3.1 inches
    Item Weight7.70 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerNissan
    SKU12303-3S500
    WarrantyThis genuine Nissan part is guaranteed by Nissan's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Trim & Engine Important vehicle option details
    1998-2004 Nissan FrontierSE, STD, XE|4 Cyl 2.4LKA24DE
    2000-2004 Nissan XterraXE|4 Cyl 2.4LKA24DE

Customer Questions & Answers

Q:
Will this part fit my car? Posted by NissanPartsDeal Specialist
A:
You can Select Your Vehicle to check if 12303-3S500 fits your vehicle.
Posted by NissanPartsDeal Specialist
Q:
How to remove and install a crankshaft pulley on 3.5L V6 Nissan Xterra? Posted by Customer
A:
Disconnect the cable from the negative terminal of the battery. Block the rear wheels and set the parking brake. Raise the front of the vehicle and support it securely on jackstands. Remove the lower splash shield if equipped. Remove the engine cooling fan and the fan shroud. Remove the drivebelts. Remove the crankshaft position sensor from the front liming chain cover. Use a strap wrench around the crankshaft pulley to hold it while using a breaker bar and socket to remove the crankshaft pulley center bolt. Use a strap wrench to hold the crankshaft pulley while removing the center bolt. A chain-type wrench may be used if you wrap a section of old drivebelt around the crankshaft pulley first. Wedge a prybar or two screwdrivers behind the crankshaft pulley and carefully pry it off the crankshaft. If the pulley is difficult to remove, place a two jaw type puller into the openings in the center of the hub and pull it off. Do not place the puller jaws around the outside of the crankshaft pulley or damage to the pulley will occur. Depending on the type of puller you have it may also be necessary to remove the radiator to gain sufficient clearance to use the puller. To install the crankshaft pulley align the pulley groove with the key on the crankshaft and slide the pulley onto the crankshaft. Install the crankshaft pulley retaining bolt and tighten it to the specific torque. The remainder of installation is the reverse of the removal.
Posted by NissanPartsDeal Specialist
Q:
How to remove and install a crankshaft pulley on 3.5L V6 Nissan Frontier? Posted by Customer
A:
Disconnect the cable from the negative terminal of the battery. Block the rear wheels and set the parking brake. Raise the front of the vehicle and support it securely on jackstands. Remove the lower splash shield if equipped. Remove the engine cooling fan and the fan shroud. Remove the drivebelts. Remove the crankshaft position sensor from the front liming chain cover. Use a strap wrench around the crankshaft pulley to hold it while using a breaker bar and socket to remove the crankshaft pulley center bolt. Use a strap wrench to hold the crankshaft pulley while removing the center bolt. A chain-type wrench may be used if you wrap a section of old drivebelt around the crankshaft pulley first. Wedge a prybar or two screwdrivers behind the crankshaft pulley and carefully pry it off the crankshaft. If the pulley is difficult to remove, place a two jaw type puller into the openings in the center of the hub and pull it off. Do not place the puller jaws around the outside of the crankshaft pulley or damage to the pulley will occur. Depending on the type of puller you have it may also be necessary to remove the radiator to gain sufficient clearance to use the puller. To install the crankshaft pulley align the pulley groove with the key on the crankshaft and slide the pulley onto the crankshaft. Install the crankshaft pulley retaining bolt and tighten it to the specific torque. The remainder of installation is the reverse of the removal.
Posted by NissanPartsDeal Specialist
Q:
What should be done after disconnecting the negative cable from the battery for the 2002 Nissan Xterra? Posted by Customer
A:
Raise the front of the vehicle and secure it on jackstands.
Posted by NissanPartsDeal Specialist
Q:
What needs to be done before removing the crankshaft pulley for the 1998 Nissan Frontier? Posted by Customer
A:
The drivebelts need to be removed.
Posted by NissanPartsDeal Specialist
If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Nissan Part 12303-3S500, the Right Choice

To ensure reliability, purchase Nissan part # 12303-3S500 Pulley-Crankshaft. It is sometimes referred to as Nissan Crankshaft Pulley. OEM parts are the #1 choice in terms of quality. Crafted by Nissan, they follow rigorous factory specs and go through the demanding quality control processes during manufacturing. This part fits 1998-2004 Nissan Frontier, 2000-2004 Nissan Xterra.

NissanPartsDeal.com is a leading supplier of genuine Nissan parts and accessories such as Nissan 123033S500 Pulley-Crankshaft. Welcome to our vast selection of competitively-priced genuine Nissan parts available online. Each OEM Nissan part we provide is backed by a manufacturer's warranty and is subject to a stress-free return policy. Place your order now and receive your parts quickly, shipped directly to your doorstep.

Why choose Nissan Parts Deal

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly