Nissan 12303-3WS0A Pulley-Crankshaft

You can Select Your Vehicle to check if 12303-3WS0A fits your vehicle.

Remove the cable from the negative terminal of the battery and turn on the parking brake and block the rear wheels. Image Remove the right front wheel: Loosen the lug nuts of the right front wheel the, safely jack up the front part of the car and put it on jackstands, then finally, detach the right front wheel. Disconnect the drivebelt as well as the engine splash shield. Remove the starter as well as fix the driveplate with the help of a large screwdriver. Remove the crankshaft pulley by slackening the bolt that is fixing it and use puller to pull the pulley off the crankshaft while ensure that the right adapter is used to pull on the crankshaft pulley in order to avoid damaged the thread or end of the crank shaft, and ensure that the jaws of the puller are suitably placed on the hub of the pulley. To fit the crankshaft pulley, ensure that the groove of the pulley fits on the key of the crankshaft and slide it over as you fit the bolt that secures it then tighten it to the recommended torque. The rest of the installation procedure, in turn, is in the format of the removal process, as mentioned above. Last of all charge the battery and do the other re learn that could be required.