Contact Us: Live Chat or 1-888-726-6993
×
Search Bar
Search by Part Number, Part Name, Description
My Garage
My Account
My Cart
Make sure this part fits your vehicle

Nissan 31375-41X00 Seal-Oil

1987-2004 Nissan 3137541X00

Nissan 31375-41X00 Seal-Oil
Nissan 31375-41X00 Seal-Oil
Nissan 31375-41X00 Seal-Oil
Nissan 31375-41X00 Seal-Oil
  • Part Description
    Seal-Oil
  • Lookup Code
    31379M
  • Manufacturer
    Nissan
  • Manufacturer's Notes
    This part is discontinued.
Customer Questions & Answers

31375-41X00 Seal-Oil is Lookup Code 31379M in the diagram below

1994 Nissan Hardbody Pickup (D21) Seal-Oil Diagram for 31375-41X00
The diagram listed above is for your reference. View diagram for your vehicle

Related Parts

  • Product Specifications

    BrandGenuine Nissan
    Lookup Code31379M
    Manufacturer Part Number31375-41X00
    Part DescriptionSeal-Oil
    Item Dimensions1.0 x 1.0 x 0.5 inches
    Item Weight1.00 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerNissan
    SKU31375-41X00
    WarrantyThis genuine Nissan part is guaranteed by Nissan's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65

  • Vehicle Fitment

    Year Make Model Trim & Engine Important vehicle option details
    1989-1998 Nissan 240SXSE, STD|4 Cyl 2.4LKA24D, KA24DE, KA24E
    1990-1996 Nissan 300ZXGL, GLL|6 Cyl 3.0LVD30DTT, VG30D, VG30DTT
    1998-2004 Nissan FrontierSC, SE, XE|4 Cyl 2.4L, 6 Cyl 3.3LKA24DE, VG33E
    1987-1994 Nissan Hardbody Pickup (D21)DX, GST, SST, ST, STD|4 Cyl 2.4L, 6 Cyl 3.0LKA24E, VG30, VG30E, Z24
    1995-1997 Nissan Hardbody Pickup (D21U)Long Body SE, Long Body XE, SE, Short Body XE, XE|4 Cyl 2.4L, 6 Cyl 3.0LKA24E, VG30E
    1987-2004 Nissan PathfinderLE, SE, ST, XE|6 Cyl 3.0L, 6 Cyl 3.3L, 6 Cyl 3.5LVG30E, VG30I, VG33E, VQ35DE
    1989-1990 Nissan VanXE/GXE|4 Cyl 2.4LZ24I
    2000-2004 Nissan XterraSE, XE|6 Cyl 3.3LVG33E, VG33ER

Customer Questions & Answers

Q:
I want to make sure this part fits my car Posted by NissanPartsDeal Specialist
A:
You can Select Your Vehicle to check if 31375-41X00 fits your vehicle.
Posted by NissanPartsDeal Specialist
Q:
What are the steps for replacing the front output shaft seal for the 1999 Nissan Pathfinder? Posted by Customer
A:
Remove the flange nut, withdraw the flange, pry out the old seal and discard it. Lubricate the lips of the new seal and the seal case with multi-purpose grease. Tap the new seal evenly into position with a seal installation tool or a large socket. Install the companion flange and apply a bead of RTV sealant to the ends of the splines visible in the center of the flange. Install the nut and tighten it to the specified torque. Finally, install the driveshaft and check the lubricant level, adding the recommended type of lubricant to reach the bottom of the filler hole if necessary.
Posted by NissanPartsDeal Specialist
See expert answers on similar Transfer Case Seal
Q:
Is there anything else to consider during installation for the 1998 Nissan Pathfinder? Posted by Customer
A:
Before installing the driveshaft, lubricate the splines of the transmission output shaft and the outside of the driveshaft yoke with lightweight grease.
Posted by NissanPartsDeal Specialist
See expert answers on similar Transfer Case Seal
Q:
What steps are involved in replacing the shift shaft oil seal for the 2003 Nissan Xterra? Posted by Customer
A:
Mark the relationship of the lever to the shift shaft, detach the linkage from the lever, then loosen the pinch bolt and slide the lever off the shaft. Carefully pry the seal out of the case. Lubricate the new seal with multi-purpose grease and install it over the shaft, tapping it into place with an appropriately sized deep socket. Install the lever onto the shaft and tighten the pinch bolt securely. Reconnect the linkage to the lever, install the bolt and tighten it securely. Finally, check the lubricant level and add the recommended type of lubricant to reach the bottom of the filler hole if necessary.
Posted by NissanPartsDeal Specialist
See expert answers on similar Transfer Case Seal
Q:
What is a common cause of oil leaks in the transmission for the 2002 Nissan Xterra? Posted by Customer
A:
Oil leaks are often caused by wear of the extension housing oil seal, located at the extreme rear of the transmission.
Posted by NissanPartsDeal Specialist
Q:
What should be done after inserting the driveshaft for the 1991 Nissan 240SX? Posted by Customer
A:
Raise the driveshaft, align the companion flange marks, and install and evenly tighten the flange bolts to 29-33 ft. lbs.
Posted by NissanPartsDeal Specialist
Q:
How do you remove the oil seal from the extension for the 1992 Nissan 240SX? Posted by Customer
A:
Use the proper tool to remove the oil seal from the extension.
Posted by NissanPartsDeal Specialist
See expert answers on similar Transfer Case Seal
Q:
Is there anything else to consider during installation for the 2004 Nissan Frontier? Posted by Customer
A:
Before installing the driveshaft, lubricate the splines of the transmission output shaft and the outside of the driveshaft yoke with lightweight grease.
Posted by NissanPartsDeal Specialist
Q:
What steps are involved in replacing the shift shaft oil seal for the 2002 Nissan Frontier? Posted by Customer
A:
Mark the relationship of the lever to the shift shaft, detach the linkage from the lever, then loosen the pinch bolt and slide the lever off the shaft. Carefully pry the seal out of the case. Lubricate the new seal with multi-purpose grease and install it over the shaft, tapping it into place with an appropriately sized deep socket. Install the lever onto the shaft and tighten the pinch bolt securely. Reconnect the linkage to the lever, install the bolt and tighten it securely. Finally, check the lubricant level and add the recommended type of lubricant to reach the bottom of the filler hole if necessary.
Posted by NissanPartsDeal Specialist
See expert answers on similar Transfer Case Seal
If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Nissan Part 31375-41X00, the Right Choice

To ensure reliability, purchase Nissan part # 31375-41X00 Seal-Oil. It is sometimes referred to as Nissan Transfer Case Seal. OEM parts are the #1 choice in terms of quality. Crafted by Nissan, they follow rigorous factory specs and go through the demanding quality control processes during manufacturing. This part fits 1989-1998 Nissan 240SX, 1990-1996 Nissan 300ZX, 1998-2004 Nissan Frontier, 1987-2004 Nissan Pathfinder.

NissanPartsDeal.com is a leading supplier of genuine Nissan parts and accessories such as Nissan 3137541X00 Seal-Oil. Welcome to our vast selection of competitively-priced genuine Nissan parts available online. Each OEM Nissan part we provide is backed by a manufacturer's warranty and is subject to a stress-free return policy. Place your order now and receive your parts quickly, shipped directly to your doorstep.

Why choose Nissan Parts Deal

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly