Contact Us: Live Chat or 1-888-726-6993
My Garage
My Account
My Cart
Make sure this part fits your vehicle

Nissan 33140-33G02 Seal Oil

1986-2001 Nissan 3314033G02

Nissan 33140-33G02 Seal Oil
  • Part Description
    Seal-Oil,Transfer Case
  • Lookup Code
    33114
  • Replaced By
    33142-33G10
  • Manufacturer
    Nissan
Customer Questions & Answers
$11.80 MSRP: $15.73
You Save: $3.93 (25%)
1
ADD TO CART
Ships in 1-2 Business Days
  • Product Specifications

    BrandGenuine Nissan
    Lookup Code33114
    Manufacturer Part Number33140-33G02
    Part DescriptionSeal-Oil,Transfer Case
    Item Dimensions2.7 x 2.7 x 0.4 inches
    Item Weight0.60 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerNissan
    SKU33140-33G02
    WarrantyThis genuine Nissan part is guaranteed by Nissan's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Trim & Engine Important vehicle option details
    1998-2001 Nissan FrontierSC, SE, XE|4 Cyl 2.4L, 6 Cyl 3.3LKA24DE, VG33E
    1986-1994 Nissan Hardbody Pickup (D21)DX, GST, ST|4 Cyl 2.4L, 4 Cyl 2.5L Diesel, 6 Cyl 3.0LKA24E, SD25, VG30, VG30E, Z24
    1995-1997 Nissan Hardbody Pickup (D21U)Long Body SE, Long Body XE, SE, Short Body XE, XE|4 Cyl 2.4L, 6 Cyl 3.0LKA24E, VG30E
    1987-2001 Nissan PathfinderDX, LE, SE, ST, XE|4 Cyl 2.4L, 6 Cyl 3.0L, 6 Cyl 3.3L, 6 Cyl 3.5LVG30E, VG30I, VG33E, VQ35DE, Z24I
    2000-2001 Nissan XterraSE, XE|6 Cyl 3.3LVG33E

Customer Questions & Answers

Q:
I want to make sure this part fits my car Posted by NissanPartsDeal Specialist
A:
You can Select Your Vehicle to check if 33140-33G02 fits your vehicle.
Posted by NissanPartsDeal Specialist
Q:
How do you perform various tasks related to replacing the output shaft seals and shift shaft oil seal on a transfer case on Nissan Xterra? Posted by Customer
A:
Raise the vehicle and support it securely on jackstands. For the front output shaft seal, a flange holding tool or chain wrench will be required to keep the companion flange from moving while the nut is loosened. Remove the flange nut, withdraw the flange, pry out the old seal and discard it, lubricate the lips of the new seal and the seal case with multi-purpose grease, then tap it evenly into position with a seal installation tool or a large socket, install the companion flange, apply a bead of RTV sealant to the ends of the splines visible in the center of the flange, install the nut and tighten it to the torque, install the driveshaft and check and, if necessary, add the recommended type of lubricant to bring the level up to the bottom of the filler hole. For the rear output shaft seal, pry out the old seal and discard it, lubricate the lips of the new seal and the seal case with multi-purpose grease, then tap it evenly into position with a seal installation tool or a large socket, install the driveshaft and check and, if necessary, add the recommended type of lubricant to bring the level up to the bottom of the filler hole. For the shift shaft oil seal, mark the relationship of the lever to the shift shaft, detach the linkage from the lever, then loosen the pinch bolt and slide the lever off the shaft, carefully pry the seal out of the case, lubricate the new seal with multi-purpose grease, then install it over the shaft and tap it into place with an appropriately sized deep socket, install the lever onto the shaft and tighten the pinch bolt securely, reconnect the linkage to the lever, install the bolt and tighten it securely, and check and, if necessary, add the recommended type of lubricant to bring the level up to the bottom of the filler hole.
Posted by NissanPartsDeal Specialist
Q:
What are the steps for replacing the front output shaft seal for the 2002 Nissan Pathfinder? Posted by Customer
A:
Remove the flange nut, withdraw the flange, pry out the old seal and discard it. Lubricate the lips of the new seal and the seal case with multi-purpose grease. Tap the new seal evenly into position with a seal installation tool or a large socket. Install the companion flange and apply a bead of RTV sealant to the ends of the splines visible in the center of the flange. Install the nut and tighten it to the specified torque. Finally, install the driveshaft and check the lubricant level, adding the recommended type of lubricant to reach the bottom of the filler hole if necessary.
Posted by NissanPartsDeal Specialist
See expert answers on similar Transfer Case Seal
Q:
What's the final step of the process for the 2003 Nissan Pathfinder? Posted by Customer
A:
Finally, install the driveshaft, being careful not to damage the lip of the new seal during the installation.
Posted by NissanPartsDeal Specialist
See expert answers on similar Transfer Case Seal
Q:
How can you address an oil leak from the extension housing oil seal for the 2002 Nissan Xterra? Posted by Customer
A:
To replace the seal, start by raising the vehicle and ensuring it's securely supported on jackstands.
Posted by NissanPartsDeal Specialist
Q:
What steps are involved in replacing the shift shaft oil seal for the 2001 Nissan Frontier? Posted by Customer
A:
Mark the relationship of the lever to the shift shaft, detach the linkage from the lever, then loosen the pinch bolt and slide the lever off the shaft. Carefully pry the seal out of the case. Lubricate the new seal with multi-purpose grease and install it over the shaft, tapping it into place with an appropriately sized deep socket. Install the lever onto the shaft and tighten the pinch bolt securely. Reconnect the linkage to the lever, install the bolt and tighten it securely. Finally, check the lubricant level and add the recommended type of lubricant to reach the bottom of the filler hole if necessary.
Posted by NissanPartsDeal Specialist
See expert answers on similar Transfer Case Seal
Q:
What should you do after securing the 2001 Nissan Frontier? Posted by Customer
A:
Remove the driveshaft to access the extension housing oil seal.
Posted by NissanPartsDeal Specialist
If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Nissan Part 33140-33G02, the Right Choice

To ensure reliability, purchase Nissan part # 33140-33G02 Seal Oil. It is sometimes referred to as Nissan Transfer Case Seal. OEM parts are the #1 choice in terms of quality. Crafted by Nissan, they follow rigorous factory specs and go through the demanding quality control processes during manufacturing. This part fits 1998-2001 Nissan Frontier, 1986-1994 Nissan Hardbody Pickup (D21), 1987-2001 Nissan Pathfinder, 2000-2001 Nissan Xterra.

NissanPartsDeal.com is a leading supplier of genuine Nissan parts and accessories such as Nissan 3314033G02 Seal Oil. Welcome to our vast selection of competitively-priced genuine Nissan parts available online. Each OEM Nissan part we provide is backed by a manufacturer's warranty and is subject to a stress-free return policy. Place your order now and receive your parts quickly, shipped directly to your doorstep.

Why choose Nissan Parts Deal

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly