Nissan 37000-5S705 Shaft Assembly-PROPELLER

You can Select Your Vehicle to check if 37000-5S705 fits your vehicle.

Yes, for 4WD models, in addition to marking the reference match marks between the driveshaft and the pinion flange, also mark the relationship to the front differential companion flange and the transfer case companion flange. Then, remove the bolts and nuts from these flanges, lower the driveshaft, and attach its ends to the respective flanges. Install the bolts and nuts, and tighten them to the specified torque.

Check the tightness of the driveshaft mounting bolts at both ends. For 4WD models, repeat the above checks on the front driveshaft. Inspect for leakage where the driveshafts connect to the transfer case and front differential. Also, check the joints of the front drive axles for any looseness and inspect the rubber boots and both ends of each axle for grease or oil leakage.