Nissan 11215-0L700 Stopper-Rubber, Engine Mounting

You can Select Your Vehicle to check if 11215-0L700 fits your vehicle.

The left-rear mount requires removing nuts at the mount bracket from below and the through-bolt at the chassis bracket from above, followed by lowering the transaxle to clear the bracket and removing the mount.

For replacement, disconnect the cable from the negative battery terminal, set the parking brake, block the rear wheels, raise the front of the vehicle, and support it securely on jackstands. Remove the splash shields and, if applicable, disconnect the wiring harness for the electronically controlled engine mount. Position a floor jack under the transaxle case with a wood block in between, then remove the through-bolts from the front and rear mounts, detach the crossmember from the vehicle, and remove the mount-to-engine bracket through-bolts.