Nissan E4303-5HL0A STRUT Kit Front LH

You can Select Your Vehicle to check if E4303-5HL0A fits your vehicle.

Guide the strut assembly back into the fenderwell and install the upper mounting bolts, tightening them to the specified torque, preferably with assistance due to the weight and awkwardness of the strut.

Install the wheel and lug nuts, lower the vehicle, and tighten the lug nuts to the required torque.

Remove the piston rod nut using an Allen wrench, then take off the upper suspension support and inspect the bearing for smooth operation, replacing it if necessary. Check the rubber portion of the suspension support for deterioration and replace it if there is any separation. Lift the spring seat and upper insulator from the piston rod, checking the rubber spring seat for damage and replacing it if needed.