Nissan 54302-1B026 Strut Kit-Front Suspension,RH

You can Select Your Vehicle to check if 54302-1B026 fits your vehicle.

Guide the brake hose through its bracket in the strut and install the retaining clip, then install the wheel and lug nuts, lower the vehicle, and tighten the lug nuts to the specified torque before tightening the upper mounting nuts to the specified torque.

The final step is to tighten the nuts to the specified torque.

Slide the dust boot off the damper shaft and check the lower insulator for wear, cracking, and hardness, replacing it if necessary.

To assess shock absorbers, park the vehicle on level ground with the engine off and the parking brake engaged. Check tire pressures and press down on each corner of the vehicle, observing its movement and rebound. The vehicle should come to rest in a level position within one or two bounces. If it continues to bounce or fails to return to its original position, it may indicate worn or weak shock absorbers. Repeat this test at the other three corners of the vehicle and raise it on jackstands to inspect the front struts and rear shock absorbers for fluid leakage, secure mounting, and damage. Replace the shocks as a set if leakage is found.