Nissan 46310-8Z500 Tube-Brake Rear LH

You can Select Your Vehicle to check if 46310-8Z500 fits your vehicle.

To replace the chassis-to-rear axle brake hose, raise the rear of the vehicle, block the front wheels, unscrew the brake line fitting from the hose at the chassis bracket, and remove the U-clip. At the axle end, unscrew the two brake line fittings, unscrew the bolt securing the fitting block to the axle housing, separate the lines from the fitting block, and remove the hose.

To replace the front flexible brake hose, begin by loosening the wheel lug nuts, raising the vehicle, and removing the wheel. At the bracket, unscrew the brake line fitting from the hose using a flare-nut wrench. Remove the U-clip from the female fitting at the bracket and pass the hose through it. On Pathfinder models, disconnect the hose from the strut bracket. At the caliper end, remove the inlet fitting bolt and separate the hose. Replace the two copper sealing washers.