Genuine Nissan Juke HVAC Pressure Switch

Nissan Juke HVAC Pressure Switch Parts Questions & Experts Answers

• Sensor Assembly-Pressure
  92136-1FA0A
  Q: How to remove A/C Accumulator,A/C Compressor,A/C Condenser,A/C Expansion Valve,Evaporator and HVAC Pressure Switch of an air conditioning system on Nissan Juke?

  A: To remove the compressor, discharge the air conditioning system, remove the drivebelt, unscrew the refrigerant pipe retaining plates, disconnect the wiring, and remove the compressor. Drain oil if renewing. For refitting, lubricate new sealing rings, fit the pipes, reconnect the wiring, and refit the drivebelt. For the condenser, remove the front bumper, air guides, intercooler, disconnect the pipes, and remove the condenser. For the receiver/dryer, remove the bumper, air guide, bolts, and disconnect the pipes. For the pressure switch, disconnect the wiring, unscrew it, and replace the sealing ring. For the evaporator, remove the heater/ventilation housing, components within, and the evaporator cover. For the expansion valve, remove the cowl panel, disconnect pipes, undo the bolts, and remove it. Refit with new seals.