What should be considered when renewing main and big-end bearings during an engine overhaul on Nissan Juke?

Even though the main and rod bearings should be renewed during the engine overhaul, the old bearings should be retained for close examination, as they may reveal valuable information about the condition of the engine, with the bearing shells graded by thickness and indicated by a colour code. Bearing failure can occur due to lack of lubrication, the presence of dirt or foreign particles, overloading the engine, or corrosion, and the cause must be corrected before reassembly to prevent recurrence. When examining the bearing shells, remove them from their locations and lay them out on a clean surface to match any problems with the corresponding crankshaft journal, avoiding contact with the bearing surface to prevent scratches. Dirt and foreign matter can enter the engine during assembly, through filters, or from machining operations, often embedding in the soft bearing material, while large particles may score or gouge the bearing and journal; thorough cleaning of all parts and regular oil and filter changes are essential for prevention. Lack of lubrication can result from excessive heat, overloading, oil leakage, or blocked oil passages, leading to bearing destruction and overheating. Driving habits, such as full-throttle, low-speed operation, can also negatively impact bearing life by causing high loads and fatigue failure, while short-distance driving can lead to corrosion of the engine oil, forming acid that attacks the bearing material. Incorrect installation during assembly can result in oil starvation or high spots on the bearing due to trapped dirt or foreign particles. Care should be taken not to touch the bearing surface during reassembly to avoid scratching or contaminating it, and renewing the bearing shells during engine overhaul is essential to avoid false economy.

Genuine Nissan Juke Rod Bearing

Engine Connecting Rod Bearing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

30 Rod Bearings found

View related parts
Nissan Juke Bearing Set-Connecting Rod
Part Number: 12150-1KC0A
$28.46 MSRP: $37.95
You Save: $9.49 (26%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing
- Manufacturer Note: STD G=0
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2011-2014 Nissan Juke | Base, Luxury, Nismo, S, SL, SV, Upper | 4 Cyl 1.6L | MR16DDT
View related parts
Nissan Juke Bearing Set-Connecting Rod
Part Number: 12150-4BB0A
$19.49 MSRP: $25.98
You Save: $6.49 (25%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing
- Manufacturer Note: STD G=0
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2013-2017 Nissan Juke | Base, Luxury, Nismo, S, SL, SV, Upper | 4 Cyl 1.6L | MR16DDT
View related parts
Nissan Juke Bearing Set-Connecting Rod
Part Number: 12150-1KC0B
$23.10 MSRP: $30.80
You Save: $7.70 (25%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Manufacturer Note: STD G=1,0
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2011-2014 Nissan Juke | Base, Luxury, Nismo, S, SL, SV, Upper | 4 Cyl 1.6L | MR16DDT
View related parts
Nissan Juke Bearing Set-Connecting Rod
Part Number: A2151-4BB0A
$78.25 MSRP: $104.33
You Save: $26.08 (25%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing
- Manufacturer Note: KH1DK1 US25
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2013-2017 Nissan Juke | Base, Luxury, Nismo, S, SL, SV, Upper | 4 Cyl 1.6L | MR16DDT
View related parts
Nissan Juke Bearing Set-Connecting Rod
Part Number: 12150-4BB1B
$17.89 MSRP: $23.85
You Save: $5.96 (25%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2013-2017 Nissan Juke | Base, Luxury, Nismo, S, SL, SV, Upper | 4 Cyl 1.6L | MR16DDT
View related parts
Nissan Juke Bearing Set-Connecting Rod
Part Number: 12150-1KC1B
$18.14 MSRP: $24.18
You Save: $6.04 (25%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Manufacturer Note: STD G=2,1
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2011-2014 Nissan Juke | Base, Luxury, Nismo, S, SL, SV, Upper | 4 Cyl 1.6L | MR16DDT
View related parts
Nissan Juke Bearing Set-Connecting Rod
Part Number: 12150-4BB2B
$18.21 MSRP: $24.28
You Save: $6.07 (25%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2013-2017 Nissan Juke | Base, Luxury, Nismo, S, SL, SV, Upper | 4 Cyl 1.6L | MR16DDT
View related parts
Nissan Juke Bearing Set-Connecting Rod
Part Number: 12150-4BB0B
$19.21 MSRP: $25.62
You Save: $6.41 (26%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2013-2017 Nissan Juke | Base, Luxury, Nismo, S, SL, SV, Upper | 4 Cyl 1.6L | MR16DDT
View related parts
Nissan Juke Bearing Set-Connecting Rod
Part Number: 12150-4BB1A
$17.89 MSRP: $23.85
You Save: $5.96 (25%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing
- Manufacturer Note: STD G=1
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2013-2017 Nissan Juke | Base, Luxury, Nismo, S, SL, SV, Upper | 4 Cyl 1.6L | MR16DDT
View related parts
Nissan Juke Bearing Set-Connecting Rod
Part Number: 12150-1KC2B
$17.48 MSRP: $23.30
You Save: $5.82 (25%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Manufacturer Note: STD G=3,2
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2011-2014 Nissan Juke | Base, Luxury, Nismo, S, SL, SV, Upper | 4 Cyl 1.6L | MR16DDT
View related parts
Nissan Juke Bearing Set-Connecting Rod
Part Number: 12150-4BB2A
$18.41 MSRP: $24.55
You Save: $6.14 (26%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing
- Manufacturer Note: STD G=2
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2013-2017 Nissan Juke | Base, Luxury, Nismo, S, SL, SV, Upper | 4 Cyl 1.6L | MR16DDT
View related parts
Nissan Juke Bearing Set-Connecting Rod
Part Number: 12150-1KC3A
$21.49 MSRP: $28.65
You Save: $7.16 (25%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Manufacturer Note: STD G=3
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2011-2014 Nissan Juke | Base, Luxury, Nismo, S, SL, SV, Upper | 4 Cyl 1.6L | MR16DDT
View related parts
Nissan Juke Bearing Set-Connecting Rod
Part Number: 12150-1KC3B
$17.48 MSRP: $23.30
You Save: $5.82 (25%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Manufacturer Note: STD G=4,3
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2011-2014 Nissan Juke | Base, Luxury, Nismo, S, SL, SV, Upper | 4 Cyl 1.6L | MR16DDT
View related parts
Nissan Juke Bearing Set-Connecting Rod
Part Number: 12150-4BB3B
$18.21 MSRP: $24.28
You Save: $6.07 (25%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2013-2017 Nissan Juke | Base, Luxury, Nismo, S, SL, SV, Upper | 4 Cyl 1.6L | MR16DDT
View related parts
Nissan Juke Bearing Set-Connecting Rod
Part Number: 12150-4BB4A
$20.36 MSRP: $27.15
You Save: $6.79 (26%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing
- Manufacturer Note: STD G=4
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2013-2017 Nissan Juke | Base, Luxury, Nismo, S, SL, SV, Upper | 4 Cyl 1.6L | MR16DDT
View related parts
Nissan Juke Bearing Set-Connecting Rod
Part Number: 12150-3YV2A
$28.48 MSRP: $37.97
You Save: $9.49 (25%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Manufacturer Note: STD G=2
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2013-2017 Nissan Juke | Nismo, Nismors | 4 Cyl 1.6L | MR16DDT
View related parts
Nissan Juke Bearing Set-Connecting Rod
Part Number: 12150-3YV2B
$28.48 MSRP: $37.97
You Save: $9.49 (25%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2013-2017 Nissan Juke | Nismo, Nismors | 4 Cyl 1.6L | MR16DDT
View related parts
Nissan Juke Bearing Set-Connecting Rod
Part Number: 12150-3YV3B
$30.61 MSRP: $40.82
You Save: $10.21 (26%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2013-2017 Nissan Juke | Nismo, Nismors | 4 Cyl 1.6L | MR16DDT
View related parts
Nissan Juke Bearing Set-Connecting Rod
Part Number: 12150-4BB3A
$19.21 MSRP: $25.62
You Save: $6.41 (26%)
Product Specifications
- Other Name: Bearing
- Manufacturer Note: STD G=3
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2013-2017 Nissan Juke | Base, Luxury, Nismo, S, SL, SV, Upper | 4 Cyl 1.6L | MR16DDT
View related parts
Nissan Juke Bearing Set-Connecting Rod
Part Number: 12150-1KC2A
Product Specifications
- Manufacturer Note: STD G=2
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2011-2014 Nissan Juke | Base, Luxury, Nismo, S, SL, SV, Upper | 4 Cyl 1.6L | MR16DDT

| Page 1 of 2 |Next >

1-20 of 30 Results

Nissan Juke Rod Bearing

If you need any OEM Nissan Juke Rod Bearing, feel free to choose them out of our huge selection of genuine Nissan Juke Rod Bearing. All our parts are offered at unbeatable prices and are supported by the manufacturer's warranty. In addition, we offer quick shipping to have your parts delivered to your door step in a matter of days.

Nissan Juke Rod Bearing Parts Questions & Experts Answers

Bearing Set-Connecting Rod
12150-4BB0A
Q: What should be considered when renewing main and big-end bearings during an engine overhaul on Nissan Juke?
A: Even though the main and rod bearings should be renewed during the engine overhaul, the old bearings should be retained for close examination, as they may reveal valuable information about the condition of the engine, with the bearing shells graded by thickness and indicated by a colour code. Bearing failure can occur due to lack of lubrication, the presence of dirt or foreign particles, overloading the engine, or corrosion, and the cause must be corrected before reassembly to prevent recurrence. When examining the bearing shells, remove them from their locations and lay them out on a clean surface to match any problems with the corresponding crankshaft journal, avoiding contact with the bearing surface to prevent scratches. Dirt and foreign matter can enter the engine during assembly, through filters, or from machining operations, often embedding in the soft bearing material, while large particles may score or gouge the bearing and journal; thorough cleaning of all parts and regular oil and filter changes are essential for prevention. Lack of lubrication can result from excessive heat, overloading, oil leakage, or blocked oil passages, leading to bearing destruction and overheating. Driving habits, such as full-throttle, low-speed operation, can also negatively impact bearing life by causing high loads and fatigue failure, while short-distance driving can lead to corrosion of the engine oil, forming acid that attacks the bearing material. Incorrect installation during assembly can result in oil starvation or high spots on the bearing due to trapped dirt or foreign particles. Care should be taken not to touch the bearing surface during reassembly to avoid scratching or contaminating it, and renewing the bearing shells during engine overhaul is essential to avoid false economy.

Related Nissan Juke Parts

Browse by Year

2017 Rod Bearing 2016 Rod Bearing 2015 Rod Bearing 2014 Rod Bearing 2013 Rod Bearing 2012 Rod Bearing 2011 Rod Bearing