How do you remove and install the front and rear bumpers for Nissan Maxima?

First, set the parking brake, then lift the car and secure it with jackstands; Make sure that the parking brake is engaged before lifting the vehicle and placing it chocks on jackstands. Remove the cable by pulling on theclamp and unscrew any further connectors to the negative terminal of the battery that might hinder the bumper extraction process. For makes of models prior 2003, peel off the splash panel at the lower part of the car, beneath the radiator and bumper, then the radiator grille, headlight shells, turn signal lamps and cornering lamps. Subsequently, it is time to remove the headlights and cornering lamps and to disarm the last fasteners that make the fastening of the bumper cover and contuse that the fenders and the cover itself were not damaged. At the vehicle side, the bolts of the front bumper beam bracket need to be loosened and thereby extricated from the chassis; in addition, the entire bumper assembly needs to be disconnected from the vehicle. For 2004 and later models, begin by taking off the grille, and the screws found on the under part of the bumper fascia; after that, you will release the inner fender to the fascia. Unbolt the side and front covers that are located under the engine and draw the bumper fascia away from the vehicle, also unscrew the electrical connectors that are situated between the bumper fascia and all the lights and finally, pull the foam pad from the front portion of the reinforcing bar. Remove the AHered temperature sensor if installed, remove the reinforcing bar from the brackets, and remove the bumper brackets if necessary. On 2003 and earlier models, go to the rear to uninstall the fasteners under the car in the bottom of the rear bumper fascia area and under the license plate area, and open the trunk to remove the trim which would expose the upper part of the mounting bolts. If necessary there is an easy access to the rear bumper beam, and that is to remove the mounting bolts, and the rear bumper beam also comes off. For 2004 and later models, take off the rear trim panel inside the boot, then you will see the mounting nuts of the rear combination lamps, disconnect the lamps connectors and then take off the lamps. Last, and place the bumper fascia to the vehicle Sf, unscrew every trim clip that attaches the bumper fascia to the vehicle , and then released the foam from the bumper reinforcing bar before you will loosen the mounting nut. Installation essentially involves the activities that are considered to be the reverse of the removal activities.

Genuine Nissan Maxima Bumper

Bumper Fascia

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

45 Bumpers found

View related parts
Nissan Maxima Bumper Set Front
Part Number: 62022-4RB1H
$372.30 MSRP: $541.53
You Save: $169.23 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Fascia Kit-Front Bumper; Bumper Cover
- Position: Front
- Replaces: 62022-4RB0H
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2016-2019 Nissan Maxima | Platinum, SL, SR, SV | 6 Cyl 3.5L | VQ35DE
View related parts
Nissan Maxima Front Bumper Cover
Part Number: 62022-9DJ0H
$360.41 MSRP: $524.24
You Save: $163.83 (32%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Fascia Kit-Front Bumper; Bumper Cover
- Position: Front
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2018-2023 Nissan Maxima | S, SV | 6 Cyl 3.5 L GAS, 6 Cyl 3.5L | VQ35DE
View related parts
Nissan Maxima Rear Bumper Cover
Part Number: 85022-2Y925
$148.33 MSRP: $215.75
You Save: $67.42 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fascia Kit-Rear Bumper; Bumper Cover
- Manufacturer Note: NO PAINTING
- Position: Rear
- Replaces: 85022-2Y940
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2000-2003 Nissan Maxima | GLE, GXE, GXEL, SE, SEL, SES | 6 Cyl 3.0L, 6 Cyl 3.5L | VQ30DE, VQ35DE
View related parts
Nissan Maxima Rear Bumper Cover
Part Number: 85022-4RB0H
$494.08 MSRP: $718.66
You Save: $224.58 (32%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Bumper Set-Rear Sedan ; Fascia Kit-Rear Bumper; Bumper Cover
- Position: Rear
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2016-2019 Nissan Maxima | Platinum, SL, SR, SV | 6 Cyl 3.5L | VQ35DE
View related parts
Nissan Maxima Rear Bumper Cover
Part Number: 85022-9N00H
$446.13 MSRP: $687.42
You Save: $241.29 (36%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fascia Kit-Rear Bumper; Bumper Cover
- Position: Rear
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2009-2014 Nissan Maxima | LE, Premium, S, Sport, SR, SV | 6 Cyl 3.5L | VQ35DE
View related parts
Nissan Maxima Rear Bumper Fascia, Lower
Part Number: 850B2-9DJ0E
$217.14 MSRP: $315.83
You Save: $98.69 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fascia-Rr Bumper, Lwr; Lower Bumper
- Position: Rear Lower
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2018-2023 Nissan Maxima | 40th Anniversary Edition, Platinum, Platinum Reserve, S, SL, SR, SV | 6 Cyl 3.5 L GAS, 6 Cyl 3.5L | VQ35DE
View related parts
Nissan Maxima Front Bumper Fascia Kit
Part Number: 62022-9DJ1H
$320.04 MSRP: $493.13
You Save: $173.09 (36%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fascia Kit-Front Bumper; Bumper Cover
- Position: Front
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2018-2023 Nissan Maxima | SL, SR | 6 Cyl 3.5 L GAS, 6 Cyl 3.5L | VQ35DE
View related parts
Nissan Maxima Rear Bumper Cover
Part Number: 85022-9DK0H
$372.73 MSRP: $574.31
You Save: $201.58 (36%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fascia Kit-Rear Bumper; Bumper Cover
- Position: Rear
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2018-2023 Nissan Maxima | 40th Anniversary Edition, Platinum, Platinum Reserve, S, SL, SR, SV | 6 Cyl 3.5 L GAS, 6 Cyl 3.5L | VQ35DE
View related parts
Nissan Maxima Front Primered Bumper Cover
Part Number: 62022-5Y725
$119.35 MSRP: $173.60
You Save: $54.25 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fascia Kit-Front Bumper; Bumper Cover
- Manufacturer Note: NO PAINTING
- Position: Front
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2001-2003 Nissan Maxima | GLE, GXEL, SEL, SES | 6 Cyl 3.5L | VQ35DE
View related parts
Nissan Maxima Front Bumper Cover
Part Number: 62022-9DJ2H
$347.46 MSRP: $505.40
You Save: $157.94 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fascia Kit-Front Bumper; Bumper Cover
- Position: Front
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2018-2023 Nissan Maxima | 40th Anniversary Edition, Platinum, Platinum Reserve, SR | 6 Cyl 3.5 L GAS, 6 Cyl 3.5L | VQ35DE
View related parts
Nissan Maxima Rear Bumper Fascia, Lower
Part Number: 850B2-9DJ0H
$203.26 MSRP: $295.65
You Save: $92.39 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fascia-Rr Bumper, Lwr; Lower Panel
- Position: Rear Lower
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2018-2023 Nissan Maxima | 40th Anniversary Edition, Platinum, Platinum Reserve, S, SL, SR, SV | 6 Cyl 3.5 L GAS, 6 Cyl 3.5L | VQ35DE
View related parts
Nissan Maxima Rear Sedan Bumper Set
Part Number: 85022-4RA0H
$482.01 MSRP: $701.11
You Save: $219.10 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Set-Rear Sedan ; Fascia Kit-Rear Bumper; Bumper Cover
- Position: Rear
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2016-2019 Nissan Maxima | S | 6 Cyl 3.5L | VQ35DE
View related parts
Nissan Maxima Front Bumper Cover
Part Number: 62022-4RA0H
$330.08 MSRP: $508.61
You Save: $178.53 (36%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Set Front ; Fascia Kit-Front Bumper; Bumper Cover
- Position: Front
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2016-2019 Nissan Maxima | S | 6 Cyl 3.5L | VQ35DE
View related parts
Nissan Maxima Front Bumper Cover
Part Number: 62022-9N00H
$490.60 MSRP: $713.60
You Save: $223.00 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fascia Kit-Front Bumper; Bumper Cover
- Position: Front
- Replaces: 62022-9DA0H
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2009-2014 Nissan Maxima | LE, Premium, S, SR, SV, Sport | 6 Cyl 3.5L | VQ35DE
View related parts
Nissan Maxima Front Bumper Cover
Part Number: 62022-7Y025
$406.56 MSRP: $591.36
You Save: $184.80 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fascia Kit-Front Bumper
- Position: Front
- Replaced by: 62022-7Y040
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2004-2007 Nissan Maxima | SE, SL | 6 Cyl 3.5L | VQ35DE
View related parts
Nissan Maxima Front Bumper Cover
Part Number: 62022-9DA0H
$490.60 MSRP: $713.60
You Save: $223.00 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Set Front ; Fascia Kit-Front Bumper
- Position: Front
- Replaced by: 62022-9N00H
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2011-2014 Nissan Maxima | LE, Premium, S, Sport, SR, SV | 6 Cyl 3.5L | VQ35DE
View related parts
Nissan Maxima Front Bumper Cover
Part Number: 62022-4RB0H
$372.30 MSRP: $541.53
You Save: $169.23 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Set Front ; Fascia Kit-Front Bumper
- Position: Front
- Replaced by: 62022-4RB1H
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2016-2017 Nissan Maxima | Platinum, SL, SR, SV | 6 Cyl 3.5L | VQ35DE
View related parts
Nissan Maxima Front Bumper Cover
Part Number: 62022-2Y925
$153.91 MSRP: $223.87
You Save: $69.96 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fascia Kit-Front Bumper; Bumper Cover
- Manufacturer Note: NOT PAINTED
- Position: Front
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2000-2002 Nissan Maxima | GLE, GXE, GXEL, SE, SES | 6 Cyl 3.0L | VQ30DE
View related parts
Nissan Maxima Front Bumper Cover
Part Number: F2022-40U25
$297.23 MSRP: $432.33
You Save: $135.10 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fascia Kit-Front Bumper; Bumper Cover
- Position: Front
- Replaces: F5022-40U25
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 1995-1997 Nissan Maxima | GLE, GXE | 6 Cyl 3.0L | VQ30DE
View related parts
Nissan Maxima Rear Bumper Cover
Part Number: 85022-ZK40B
$396.78 MSRP: $577.13
You Save: $180.35 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fascia Kit-Rear Bumper; Bumper Cover
- Position: Rear
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2006-2008 Nissan Maxima | SE, SL | 6 Cyl 3.5L | VQ35DE

| Page 1 of 3 |Next >

1-20 of 45 Results

Nissan Maxima Bumper

If you need any OEM Nissan Maxima Bumper, feel free to choose them out of our huge selection of genuine Nissan Maxima Bumper. All our parts are offered at unbeatable prices and are supported by the manufacturer's warranty. In addition, we offer quick shipping to have your parts delivered to your door step in a matter of days.

Nissan Maxima Bumper Parts Questions & Experts Answers

Rear Bumper Cover
85022-2Y925
Q: How do you remove and install the front and rear bumpers for Nissan Maxima?
A: First, set the parking brake, then lift the car and secure it with jackstands; Make sure that the parking brake is engaged before lifting the vehicle and placing it chocks on jackstands. Remove the cable by pulling on theclamp and unscrew any further connectors to the negative terminal of the battery that might hinder the bumper extraction process. For makes of models prior 2003, peel off the splash panel at the lower part of the car, beneath the radiator and bumper, then the radiator Grille, headlight shells, turn signal lamps and cornering lamps. Subsequently, it is time to remove the headlights and cornering lamps and to disarm the last fasteners that make the fastening of the bumper cover and contuse that the fenders and the cover itself were not damaged. At the vehicle side, the bolts of the front bumper beam bracket need to be loosened and thereby extricated from the chassis; in addition, the entire bumper assembly needs to be disconnected from the vehicle. For 2004 and later models, begin by taking off the grille, and the screws found on the under part of the bumper fascia; after that, you will release the inner fender to the fascia. Unbolt the side and front covers that are located under the engine and draw the bumper fascia away from the vehicle, also unscrew the electrical connectors that are situated between the bumper fascia and all the lights and finally, pull the foam pad from the front portion of the reinforcing bar. Remove the AHered temperature sensor if installed, remove the reinforcing bar from the brackets, and remove the bumper brackets if necessary. On 2003 and earlier models, go to the rear to uninstall the fasteners under the car in the bottom of the rear bumper fascia area and under the license plate area, and open the trunk to remove the trim which would expose the upper part of the mounting bolts. If necessary there is an easy access to the rear bumper beam, and that is to remove the mounting bolts, and the rear bumper beam also comes off. For 2004 and later models, take off the rear trim panel inside the boot, then you will see the mounting nuts of the rear combination lamps, disconnect the lamps connectors and then take off the lamps. Last, and place the bumper fascia to the vehicle Sf, unscrew every trim clip that attaches the bumper fascia to the vehicle , and then released the foam from the bumper reinforcing bar before you will loosen the mounting nut. Installation essentially involves the activities that are considered to be the reverse of the removal activities.