How do you properly remove and install the Trailing Arm of a Nissan Murano?

Loosen the rear wheel lug nuts, raise the rear of the vehicle, and support it securely on jackstands before removing the wheel. Remove the coil spring, then take out the lower arm-to-frame mounting bolt/nut and the arm-to-knuckle bolt to detach the lower rear suspension arm from the vehicle. For installation, raise the lower suspension arm with a floor jack to normal ride height and tighten the suspension arm bolts/nuts to the specified torque, ensuring the marks on the adjusting cam and subframe align. Tighten the wheel lug nuts to the specified torque. Support the rear lower suspension arm with a floor jack under the coil spring pocket, mark the adjusting cam's relationship to the subframe, and remove the lower front suspension arm-to-subframe and arm-to-knuckle mounting bolts/nuts before taking out the arm. For installation, raise the rear lower suspension arm to normal ride height and tighten the front lower suspension arm bolts/nuts, aligning the marks on the adjusting cam and subframe, followed by tightening the wheel lug nuts. For 2WD models, detach the wheel speed sensor wiring harness and stabilizer bar link from the upper suspension arm, separate the balljoint from the knuckle, and remove the suspension arm pivot bolts before taking out the arm. For AWD models, the upper suspension arm must be removed with the rear suspension subframe. Remove the brake calipers without disconnecting the hoses, hang them out of the way, and then remove the rear portion of the exhaust system, rear wheel speed sensors, wiring harnesses, and rear stabilizer bar. On AWD models, remove the rear differential, disconnect the parking brake cables, and remove the rear lower suspension arms and coil springs. Unbolt the lower ends of the shock absorbers from the front lower suspension arms, support the rear suspension subframe with two floor jacks, and remove the subframe front corner braces and remaining subframe-to-chassis braces before carefully lowering the jack until the subframe and attached suspension components are clear of the body. The suspension arms can now be removed if necessary. For installation, tighten the balljoint stud nut and install a new cotter pin, raise the lower suspension arm to normal ride height and tighten the pivot bolt nuts, and ensure all fasteners, including brake fasteners and wheel lug nuts, are tightened to the specified torque.

Genuine Nissan Murano Trailing Arm

Trailing Control Arm

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

18 Trailing Arms found

View related parts
Nissan Murano Rod Complete-Radius
Part Number: 55110-3JA0A
$46.69 MSRP: $62.25
You Save: $15.56 (25%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Link Complete-Radius Rod
- Replaced by: 55110-3JA0E
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2015-2019 Nissan Murano | Platinum, S, SL, SV | 4 Cyl 2.5L, 6 Cyl 3.5L | QR25DER, VQ35DE
View related parts
Nissan Murano Link Complete-Lower,Rear Suspension R
Part Number: 551A0-CC40A
$118.54 MSRP: $180.32
You Save: $61.78 (35%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Link Complete-Lower,Rear Suspension RH; Track Bar
- Position: Passenger Side
- Replaces: 551A0-CC000
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2005-2007 Nissan Murano | S, SE, SL | 6 Cyl 3.5L | VQ35DE
View related parts
Nissan Murano Link Complete-Radius Rod
Part Number: 55110-JP00A
$56.61 MSRP: $75.48
You Save: $18.87 (25%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Radius Arm, Radius Rod, Trailing Arm
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2020-2024 Nissan Murano | Midnight Edition, Platinum, S, SL, SV | 6 Cyl 3.5 L GAS
- 2016-2018 Nissan Murano | Platinum, S, SL, SV | 4 Cyl 2.5L, 6 Cyl 3.5L | QR25DER, VQ35DE
- 2008-2014 Nissan Murano | LE, LE/ROOF, S, SL, SL/ROOF, SV | 6 Cyl 3.5L | VQ35DE
View More
View related parts
Nissan Murano Arm Assy-Rear Suspension,LH
Part Number: 55502-CA000
$178.36 MSRP: $271.32
You Save: $92.96 (35%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Position: Driver side
- Replaced by: 55502-CA00A
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2003-2007 Nissan Murano | S, SE, SL | 6 Cyl 3.5L | VQ35DE
View related parts
Nissan Murano Rod Complete Radius
Part Number: 55110-3JA0B
$46.69 MSRP: $62.25
You Save: $15.56 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rod COMPL Radius; Radius Arm, Trailing Arm
- Replaced by: 55110-3JA0E
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2017-2019 Nissan Murano | Platinum, S, SL, SV | 6 Cyl 3.5L | VQ35DE
View related parts
Nissan Murano Arm Assy-Rear Suspension,Rh
Part Number: 55501-CA000
$175.75 MSRP: $267.33
You Save: $91.58 (35%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Position: Passenger Side
- Replaced by: 55501-CA00A
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2003-2007 Nissan Murano | S, SE, SL | 6 Cyl 3.5L | VQ35DE
View related parts
Nissan Murano Arm Rear Suspension RH
Part Number: 55501-1JA0A
$169.75 MSRP: $258.22
You Save: $88.47 (35%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm Assy-Rear Suspension,Rh; Upper Control Arm
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2010-2014 Nissan Murano | LE, LE/ROOF, S, SL, SL/ROOF, SV | 6 Cyl 3.5L | VQ35DE
View related parts
Nissan Murano Rod Complete-Radius
Part Number: 55110-CA000
$114.44 MSRP: $152.58
You Save: $38.14 (25%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Radius Arm, Trailing Arm
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2003-2007 Nissan Murano | S, SE, SL | 6 Cyl 3.5L | VQ35DE
View related parts
Nissan Murano Arm Assy-Rear Suspension,LH
Part Number: 55502-CA00A
$178.36 MSRP: $271.32
You Save: $92.96 (35%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Upper Control Arm
- Position: Driver side
- Replaces: 55502-CA000
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2003-2007 Nissan Murano | S, SE, SL | 6 Cyl 3.5L | VQ35DE
View related parts
Nissan Murano ROD COMPL RADIUS
Part Number: 55110-3JA0E
$46.69 MSRP: $62.25
You Save: $15.56 (25%)
ADD TO CART
Product Specifications
- Other Name: Radius Arm, Trailing Arm
- Replaces: 55110-3JA0C, 55110-3JA0A, 55110-3JA0D, 55110-3JA0B
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2020-2023 Nissan Murano | Midnight Edition, Platinum, S, SL, SV | 6 Cyl 3.5 L GAS
View related parts
Nissan Murano Arm Assy-Rear Suspension,Rh
Part Number: 55501-CA00A
$175.75 MSRP: $267.33
You Save: $91.58 (35%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Upper Control Arm
- Position: Passenger Side
- Replaces: 55501-CA000
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2003-2007 Nissan Murano | S, SE, SL | 6 Cyl 3.5L | VQ35DE
View related parts
Nissan Murano Arm Rear Suspension LH
Part Number: 55502-1JA0A
$173.12 MSRP: $263.33
You Save: $90.21 (35%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm Assy-Rear Suspension,LH; Upper Control Arm
- Position: Driver side
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2010-2014 Nissan Murano | LE, LE/ROOF, S, SL, SL/ROOF, SV | 6 Cyl 3.5L | VQ35DE
View related parts
Nissan Murano Arm Assy-Rear Suspension,Rh
Part Number: 55501-5AA0A
$217.99 MSRP: $331.58
You Save: $113.59 (35%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Position: Passenger Side
- Replaced by: 55501-5AA0B
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2015-2017 Nissan Murano | Platinum, S, SL, SV | 4 Cyl 2.5L, 6 Cyl 3.5L | QR25DER, VQ35DE
View related parts
Nissan Murano Arm Assy-Rear Suspension,LH
Part Number: 55502-5AA0A
$222.48 MSRP: $338.42
You Save: $115.94 (35%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Position: Driver side
- Replaced by: 55502-5AA0B
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2015-2017 Nissan Murano | Platinum, S, SL, SV | 4 Cyl 2.5L, 6 Cyl 3.5L | QR25DER, VQ35DE
View related parts
Nissan Murano Arm Assy-Rear Suspension,LH
Part Number: 55502-1AA0A
Product Specifications
- Other Name: Upper Control Arm
- Position: Driver side
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2008-2011 Nissan Murano | LE, LE/ROOF, S, SL, SL/ROOF, SV | 6 Cyl 3.5L | VQ35DE
View related parts
Nissan Murano Arm Assy-Rear Suspension,Rh
Part Number: 55501-1AA0A
Product Specifications
- Other Name: Upper Control Arm
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2008-2011 Nissan Murano | LE, LE/ROOF, S, SL, SL/ROOF, SV | 6 Cyl 3.5L | VQ35DE
View related parts
Nissan Murano Link Complete-Lower,Rear Suspension RH
Part Number: 551A0-CA000
Product Specifications
- Position: Passenger Side
- Replaced by: 551A0-CC40C
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2003-2006 Nissan Murano | S, SE, SL | 6 Cyl 3.5L | VQ35DE
View related parts
Nissan Murano Link Complete-Lower,Rear Suspension R
Part Number: 551A0-CC40C
Product Specifications
- Other Name: Link Complete-Lower,Rear Suspension RH; Lateral Arm, Track Bar
- Position: Passenger Side
- Replaces: 551A0-CA000
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2003-2006 Nissan Murano | S, SE, SL | 6 Cyl 3.5L | VQ35DE

Nissan Murano Trailing Arm

If you need any OEM Nissan Murano Trailing Arm, feel free to choose them out of our huge selection of genuine Nissan Murano Trailing Arm. All our parts are offered at unbeatable prices and are supported by the manufacturer's warranty. In addition, we offer quick shipping to have your parts delivered to your door step in a matter of days.

Nissan Murano Trailing Arm Parts Questions & Experts Answers

Rod Complete-Radius
55110-CA000
Q: How do you properly remove and install the Trailing Arm of a Nissan Murano?
A: Loosen the rear wheel lug nuts, raise the rear of the vehicle, and support it securely on jackstands before removing the wheel. Remove the coil spring, then take out the lower arm-to-frame mounting bolt/nut and the arm-to-knuckle bolt to detach the lower rear suspension arm from the vehicle. For installation, raise the lower suspension arm with a floor jack to normal ride height and tighten the suspension arm bolts/nuts to the specified torque, ensuring the marks on the adjusting cam and subframe align. Tighten the wheel lug nuts to the specified torque. Support the rear lower suspension arm with a floor jack under the coil spring pocket, mark the adjusting cam's relationship to the subframe, and remove the lower front suspension arm-to-subframe and arm-to-knuckle mounting bolts/nuts before taking out the arm. For installation, raise the rear lower suspension arm to normal ride height and tighten the front lower suspension arm bolts/nuts, aligning the marks on the adjusting cam and subframe, followed by tightening the wheel lug nuts. For 2WD models, detach the wheel speed sensor wiring harness and stabilizer bar link from the upper suspension arm, separate the balljoint from the knuckle, and remove the suspension arm pivot bolts before taking out the arm. For AWD models, the upper suspension arm must be removed with the rear suspension subframe. Remove the brake calipers without disconnecting the hoses, hang them out of the way, and then remove the rear portion of the exhaust system, rear wheel speed sensors, wiring harnesses, and rear stabilizer bar. On AWD models, remove the rear differential, disconnect the parking brake cables, and remove the rear lower suspension arms and Coil Springs. Unbolt the lower ends of the Shock Absorbers from the front lower suspension arms, support the rear suspension subframe with two floor jacks, and remove the subframe front corner braces and remaining subframe-to-chassis braces before carefully lowering the jack until the subframe and attached suspension components are clear of the body. The suspension arms can now be removed if necessary. For installation, tighten the balljoint stud nut and install a new cotter pin, raise the lower suspension arm to normal ride height and tighten the pivot bolt nuts, and ensure all fasteners, including brake fasteners and wheel lug nuts, are tightened to the specified torque.