Q: How do you remove the Washer Pump and washer fluid reservoir from a Nissan Quest?A: Loosen the right front wheel lug nuts, then raise the front of the vehicle and support it securely on jackstands before removing the wheel. Next, remove the inner fender splash shield. Unplug the electrical connectors from the Washer Pumps and fluid level sensor, and position a drain pan under the Washer Reservoir to detach the hoses from the pumps, noting that the hose for the rear Washer Pump is color coded to match its pump. Remove the Washer Reservoir mounting bolts and slide the Washer Reservoir out of the slots. To remove a pump from the Washer Reservoir, pull it out of its grommet, ensuring the grommet is in good condition; if not, replace it. Installation follows the reverse order of removal.