×
- Live Chat
- 1-888-726-6993
My Garage
My Account
My Cart
Genuine Nissan Rogue Blower Motor
A/C Heater Blower MotorEnter your vehicle info to find more parts and verify fitment
- Select Vehicle by VIN
- Select Vehicle by Model
Select by VIN
orEnter your VIN for the most accurate results.Enter your VIN for the most accurate results.
Select by Model
-- Select Model --
-- Select Year --
11 Blower Motors found
Nissan Rogue Motor Assembly Blower
Part Number: 27226-4BU0A$150.20 MSRP: $217.30You Save: $67.10 (31%)
Nissan Rogue Motor Assembly - Blower W/CASE
Part Number: 27225-ET10A$198.46 MSRP: $301.88You Save: $103.42 (35%)
Nissan Rogue Motor Assembly - Blower W/CASE
Part Number: 27225-JM01A$181.47 MSRP: $276.03You Save: $94.56 (35%)
Nissan Rogue Motor Assembly - Blower W/CASE
Part Number: 27225-JM00A$181.47 MSRP: $276.03You Save: $94.56 (35%)
Nissan Rogue Blower Motor Parts Questions & Answers
- Q: How do you replace a faulty blower motor and fan on Nissan Rogue?A: If the blower motor is found to be faulty, replace the entire blower motor and fan. The blower motor unit is balanced at the factory; individual components cannot be replaced. Disconnect the cable from the negative terminal of the battery. For 2013 and earlier models/2014 and later Rogue Select models, remove the lower instrument panel cover and driver's side front floor duct. Remove the instrument cluster. Remove the knee bolster and the knee bolster support. Unclip the front foot duct from the evaporator case. Remove the mode door motor mounting screws and remove the mode door motor from the evaporator case. Disconnect the brake pedal from the power brake booster then remove the brake pedal assembly. Disconnect the electrical connector from the blower motor. Remove the blower motor mounting screw. Rotate the blower motor counterclockwise and remove it from the housing. Installation is the reverse of removal. Reconnect the battery and perform the necessary re-learn procedures. For 2014 and later models (except for Rogue Select models), remove the glove box and housing. Disconnect the electrical connector from the blower motor. Remove the blower motor mounting screw. Pull the locking hook back on the housing then rotate the blower motor counterclockwise and remove it from the housing. Installation is the reverse of removal. Reconnect the battery and perform the necessary re-learn procedures.
Related Nissan Rogue Parts
Nissan Rogue Blend Door Actuator
Nissan Rogue Evaporator
Nissan Rogue A/C Idler Pulley
Nissan Rogue A/C Compressor
Nissan Rogue A/C Clutch
Nissan Rogue A/C Switch
Nissan Rogue A/C Accumulator
Nissan Rogue A/C Condenser Fan
Nissan Rogue A/C Expansion Valve
Nissan Rogue A/C Hose
Nissan Rogue Blower Motor
Blower Motor of Nissan Rogue is one of the most essential parts of vehicles that is actually manages air conditioning and heating systems for blowing hot or cool air inside the car cabin. The specific choice is good since it allows the drivers to control the blower motor and thereby manage the amount of air that circulates within the car; something which can be useful in defogging or cooling of the interior of the car. Usually, the blower motor controls are wired with the blower motor in the vehicle by a blower motor control module, and they are commonly easily accessible and close to one another. But, the problem with the electronic module or wiring sometimes are occurred, this leads to the malfunction of the systems and we cannot control the heating or air conditioning system. In such instances, signs are very apparent and elucidate some necessary therapy to assure the right operating of the Blower Motor.
If you need any OEM Nissan Rogue Blower Motor, feel free to choose them out of our huge selection of genuine Nissan Rogue Blower Motor. All our parts are offered at unbeatable prices and are supported by the manufacturer's warranty. In addition, we offer quick shipping to have your parts delivered to your door step in a matter of days.