How to check, adjust, and replace the brake light switch or Cruise Control Switch (ASCD switch) on Nissan Rogue?

On 2013 and earlier models and 2014 and later Rogue Select models, the Cruise Control Switch is known as the ASCD (Automatic Speed Control Device) switch, while on 2014 and later models (excluding Rogue Select models), it has been replaced by the brake pedal position sensor. The brake light switch and Cruise Control Switch or brake pedal position sensor are located on a bracket near the top of the brake pedal, activating the brake lights when the pedal is depressed and canceling cruise control operation. To check the brake light switch, observe whether the brake lights illuminate when the pedal is pressed and turn off when released. If the brake lights do not activate or the cruise control does not cancel, ensure the brake pedal is correctly adjusted, then adjust the switch by turning it counterclockwise 45 degrees, pulling the brake pedal back while pushing the switch into its bracket until the threaded portion touches its stop, and finally turning the switch 45 degrees clockwise to secure it. For replacement, unplug the electrical connector from the switch, turn the switch 45 degrees counterclockwise, pull it to the rear to remove it, and then install the new switch in reverse order. After installation, adjust the brake pedal height and then adjust the switch accordingly.

Genuine Nissan Rogue Brake Light Switch

Brake Lamp Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Brake Light Switches found

View related parts
Nissan Rogue Stoplamp Switch
Part Number: 25320-AX10A
$23.92 MSRP: $40.18
You Save: $16.26 (41%)
ADD TO CART
Product Specifications
- Other Name: Switch Assy-Stop Lamp
- Manufacturer Note: STOP LAMP SWITCH
- Replaces: 25320-AX00C, 25320-AX00E, 25320-9AE0A, 25320-AX000, 25320-AX00B, 25320-AX00A
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2008-2015 Nissan Rogue | S, SL, SV | 4 Cyl 2.5L | QR25DE
View related parts
Nissan Rogue Stop Lamp Switch Assembly
Part Number: 25320-3JA0A
$14.14 MSRP: $20.56
You Save: $6.42 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assy-Stop Lamp; Stoplamp Switch
- Manufacturer Note: 4 PRONG
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2014-2020 Nissan Rogue | S, SL, SL/Premium, SV, SV Premium | 4 Cyl 2.0L, 4 Cyl 2.5 L GAS, 4 Cyl 2.5L | MR20DD, QR25DE
View related parts
Nissan Rogue Switch Assy-Stop Lamp
Part Number: 25320-4M405
$5.41 MSRP: $7.87
You Save: $2.46 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Clip; Stoplamp Switch
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2008-2019 Nissan Rogue | S, SL, SV, SV Premium | 4 Cyl 2.5L | QR25DE
View related parts
Nissan Rogue Ascd Cancel Switch Assembly
Part Number: 25300-AT30A
$48.18 MSRP: $70.07
You Save: $21.89 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assy-Ascd Cancel
- Replaced by: 25300-3RA0A
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2012-2015 Nissan Rogue | S, SL, SV | 4 Cyl 2.5L | QR25DE
View related parts
Nissan Rogue Stop Lamp Switch Assembly
Part Number: 25320-JN00A
$36.91 MSRP: $53.69
You Save: $16.78 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assy-Stop Lamp; Stoplamp Switch
- Manufacturer Note: STOP LAMP SWITCH
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2011-2020 Nissan Rogue | S, SL, SV, SV Premium | 4 Cyl 2.5 L GAS, 4 Cyl 2.5L | QR25DE
View related parts
Nissan Rogue Stop Lamp Switch Assembly
Part Number: 25320-AX00C
$26.08 MSRP: $40.18
You Save: $14.10 (36%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assy-Stop Lamp
- Manufacturer Note: STOP LAMP SWITCH
- Replaced by: 25320-AX10A
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2008-2013 Nissan Rogue | S, SL, SV | 4 Cyl 2.5L | QR25DE
View related parts
Nissan Rogue Stop Lamp Switch Assembly
Part Number: 25320-AX00B
$26.08 MSRP: $40.18
You Save: $14.10 (36%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assy-Stop Lamp
- Replaced by: 25320-AX10A
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2008-2009 Nissan Rogue | S, SL | 4 Cyl 2.5L | QR25DE
View related parts
Nissan Rogue Switch Assy-Stop Lamp
Part Number: 25320-6PA1A
$40.96 MSRP: $65.91
You Save: $24.95 (38%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Stoplamp Switch
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2021-2022 Nissan Rogue | Platinum, S, SL, SV | 3 Cyl 1.5 L GAS, 4 Cyl 2.5 L GAS

Nissan Rogue Brake Light Switch

If you need any OEM Nissan Rogue Brake Light Switch, feel free to choose them out of our huge selection of genuine Nissan Rogue Brake Light Switch. All our parts are offered at unbeatable prices and are supported by the manufacturer's warranty. In addition, we offer quick shipping to have your parts delivered to your door step in a matter of days.

Nissan Rogue Brake Light Switch Parts Questions & Experts Answers

Stop Lamp Switch Assembly
25320-AX00C
Q: How to check, adjust, and replace the brake light switch or Cruise Control Switch (ASCD switch) on Nissan Rogue?
A: On 2013 and earlier models and 2014 and later Rogue Select models, the Cruise Control Switch is known as the ASCD (Automatic Speed Control Device) switch, while on 2014 and later models (excluding Rogue Select models), it has been replaced by the Brake Pedal position sensor. The brake light switch and Cruise Control Switch or brake pedal position sensor are located on a bracket near the top of the brake pedal, activating the brake lights when the pedal is depressed and canceling cruise control operation. To check the brake light switch, observe whether the brake lights illuminate when the pedal is pressed and turn off when released. If the brake lights do not activate or the cruise control does not cancel, ensure the brake pedal is correctly adjusted, then adjust the switch by turning it counterclockwise 45 degrees, pulling the brake pedal back while pushing the switch into its bracket until the threaded portion touches its stop, and finally turning the switch 45 degrees clockwise to secure it. For replacement, unplug the electrical connector from the switch, turn the switch 45 degrees counterclockwise, pull it to the rear to remove it, and then install the new switch in reverse order. After installation, adjust the brake pedal height and then adjust the switch accordingly.