Genuine Nissan Rogue Radiator fan

Nissan Rogue Radiator fan Parts Questions & Answers

• Fan Assembly-Radiator Cooling
  21486-JG30A
  Q: How to remove and install a cooling fan assembly in a Nissan Rogue?

  A: Drain some coolant from the Radiator to a level that's lower than the upper radiator hose. Remove the fresh air intake duct. Detach the upper radiator hose from the radiator and the coolant reservoir hose from the fan shroud. Disconnect the electrical connectors from the fan motors. Also, detach the transaxle fluid cooler hoses from the fan shroud where applicable. Remove the radiator fan assembly-to-radiator fasteners. On 2014 and later models, except Rogue Select models, remove the radiator core support. Remove the radiator fan assembly. If necessary, remove the nuts for each fan blade assembly and remove them from their motor shafts. Remove the fan motor-to-fan support retaining bolts, then remove the motor. Installation is the reverse of removal. Tighten all fasteners to the torque values. Be sure the fan shroud mounts are seated properly at the base of the radiator. Refill the cooling system. Reconnect the battery and perform the necessary re-learn procedures.