How do you remove and install the hood latch and release cable on Nissan Sentra?

To remove the latch, first, you need to disconnect the radiator grille. Scratch a line around the latch which will be helpful while reinstalling the door, now you need to unscrew the latch retaining bolts and pull out the latch. Pull the end of the cable located on the rear of the hood latch assembly out of the cable retainer while pushing on the hood release cable to detach it from the latch assembly. For the installation of the deteriorated sections, simply reverse the removal process; with the latch properly positioned to give a tight fit when closed and, the hood bumpers should be slightly pressed down. To disseminate the hood release cable, one has to dismantle two components, namely, the radiator grille and the left inner fender liner. Release the cable connector by pulling it away from the clips that is fixed on the cable across the length. Third, take out inside hood release handle and free the cable end from handle by unclipping it and disconnect the cable housing from the slot. Sucks this grommet into the passengers' compartment and then lay this cable into this hole taking care in handling not to make any twists onto it. As for the installation it is necessary to act in the reverse sequence to the removal process, pressing on the grommet from the side of the passenger compartment so that it could be inserted into the correct position on the firewall while applying sealant around the grommet.

Genuine Nissan Sentra Hood Latch

Engine Hood Latch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

12 Hood Latches found

View related parts
Nissan Sentra Male Hood Lock
Part Number: 65601-5UD0A
$45.23 MSRP: $69.69
You Save: $24.46 (36%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Lock
- Replaces: 65601-3SG0A
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2013-2019 Nissan Sentra | FE, Nismo, S, SL, SR, SV | 4 Cyl 1.6L, 4 Cyl 1.8L | MR16DDT, MRA8DE
View related parts
Nissan Sentra Male Assy-Hood Lock
Part Number: 65601-3SG0A
$45.23 MSRP: $69.69
You Save: $24.46 (36%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Replaced by: 65601-5UD0A
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2013-2018 Nissan Sentra | FE, Nismo, S, SL, SR, SV | 4 Cyl 1.6L, 4 Cyl 1.8L | MR16DDT, MRA8DE
View related parts
Nissan Sentra Male Assy-Hood Lock
Part Number: 65601-ET000
$48.26 MSRP: $70.20
You Save: $21.94 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2007-2012 Nissan Sentra | 20, SE-R, Spec V | 4 Cyl 2.0L, 4 Cyl 2.5L | MR20DE, QR25DE
View related parts
Nissan Sentra Male Assy-Hood Lock
Part Number: 65601-6Z500
$43.40 MSRP: $63.13
You Save: $19.73 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2003-2006 Nissan Sentra | 1.8, 1.8S, 2.5S, GXE, LE, SE-R, SE-R Spec V, XE | 4 Cyl 1.8L, 4 Cyl 2.5L | QG18DE, QR25DE
View related parts
Nissan Sentra Male Assy-Hood Lock
Part Number: 65601-65Y00
$38.64 MSRP: $56.20
You Save: $17.56 (32%)
ADD TO CART
Limited Availability
Product Specifications
- Other Name: Lock
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 1991-1994 Nissan Sentra | GXE, SE, SR, STD, XE | 4 Cyl 1.6L, 4 Cyl 2.0L | J/GA16DE, U/GA16DE, U/SR20DE
View related parts
Nissan Sentra Male Assy-Hood Lock
Part Number: 65601-6LA0B
$50.54 MSRP: $73.51
You Save: $22.97 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Latch, Lock
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2020-2023 Nissan Sentra | S | 4 Cyl 2.0 L GAS
View related parts
Nissan Sentra Male Hood Lock
Part Number: 65601-5M000
$43.19 MSRP: $62.82
You Save: $19.63 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Male Assy-Hood Lock; Lock
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2000-2004 Nissan Sentra | 1.8, 1.8S, 2.5S, CA, GXE, LE, SE, SE-R, SE-R Spec V, XE | 4 Cyl 1.8L, 4 Cyl 2.0L, 4 Cyl 2.5L | QG18DE, QR25DE, SR20DE
View related parts
Nissan Sentra Male Assy-Hood Lock
Part Number: 65601-6LA0A
$75.93 MSRP: $110.44
You Save: $34.51 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Latch, Lock
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2020-2024 Nissan Sentra | S, SR, SV | 4 Cyl 2.0 L GAS
View related parts
Nissan Sentra Male Assy-Hood Lock
Part Number: 65601-1M200
Product Specifications
- Other Name: Lock
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 1995-1999 Nissan Sentra | Base, GLE, GXE, S, SE, SE-R, XE | 4 Cyl 1.6L, 4 Cyl 2.0L | GA16DE, SR20DE
View related parts
Nissan Sentra Male Assy-Hood Lock
Part Number: 65601-61Y10
Product Specifications
- Other Name: Lock
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 1991-1994 Nissan Sentra | SE, XE | 4 Cyl 1.6L, 4 Cyl 2.0L | J/GA16DE, J/SR20DE
View related parts
Nissan Sentra Female Hood Lock
Part Number: 65601-02A00
Product Specifications
- Other Name: Female Assy-Hood Lock; Lock
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 1982-1986 Nissan Sentra | DX, SE, STD, XE | 4 Cyl 1.5L, 4 Cyl 1.6L, 4 Cyl 1.7L | CD17, E15, E16
View related parts
Nissan Sentra Female Assy-Hood Lock
Part Number: 65601-60A00
Product Specifications
- Other Name: Lock
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 1987-1990 Nissan Sentra | Base, GXE, SE, STD, XE | 4 Cyl 1.6L | E16I, E16S, GA16I

Nissan Sentra Hood Latch

If you need any OEM Nissan Sentra Hood Latch, feel free to choose them out of our huge selection of genuine Nissan Sentra Hood Latch. All our parts are offered at unbeatable prices and are supported by the manufacturer's warranty. In addition, we offer quick shipping to have your parts delivered to your door step in a matter of days.

Nissan Sentra Hood Latch Parts Questions & Experts Answers

Male Assy-Hood Lock
65601-ET000
Q: How do you remove and install the hood latch and release cable on Nissan Sentra?
A: To remove the latch, first, you need to disconnect the radiator grille. Scratch a line around the latch which will be helpful while reinstalling the door, now you need to unscrew the latch retaining bolts and pull out the latch. Pull the end of the cable located on the rear of the hood latch assembly out of the cable retainer while pushing on the hood release cable to detach it from the latch assembly. For the installation of the deteriorated sections, simply reverse the removal process; with the latch properly positioned to give a tight fit when closed and, the hood bumpers should be slightly pressed down. To disseminate the hood release cable, one has to dismantle two components, namely, the radiator grille and the left inner fender liner. Release the cable connector by pulling it away from the clips that is fixed on the cable across the length. Third, take out inside hood release handle and free the cable end from handle by unclipping it and disconnect the cable housing from the slot. Sucks this grommet into the passengers' compartment and then lay this cable into this hole taking care in handling not to make any twists onto it. As for the installation it is necessary to act in the reverse sequence to the removal process, pressing on the grommet from the side of the passenger compartment so that it could be inserted into the correct position on the firewall while applying sealant around the grommet.