Contact Us: Live Chat or 1-888-726-6993
My Garage
My Account
My Cart
Make sure this part fits your vehicle

Nissan 48502-3S525 Arm Kit-Pitman

1998-2004 Nissan 485023S525

Nissan 48502-3S525 Arm Kit-Pitman
  • Part Description
    Arm Kit-Pitman
  • Lookup Code
    48501L
  • Replaced By
    D8502-VK90A
  • Manufacturer
    Nissan
Customer Questions & Answers
$252.03 MSRP: $336.03
You Save: $84.00 (25%)
1
ADD TO CART
Ships in 1-3 Business Days
  • Product Specifications

    BrandGenuine Nissan
    Lookup Code48501L
    Manufacturer Part Number48502-3S525
    Part DescriptionArm Kit-Pitman
    Manufacturer Note* 48502-3S500
    Item Dimensions7.7 x 2.6 x 1.8 inches
    Item Weight2.30 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerNissan
    SKU48502-3S525
    WarrantyThis genuine Nissan part is guaranteed by Nissan's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Trim & Engine Important vehicle option details
    1998-2004 Nissan FrontierSC, SE, XE|4 Cyl 2.4L, 6 Cyl 3.3LKA24DE, VG33E
    2000-2003 Nissan XterraSE, XE|4 Cyl 2.4L, 6 Cyl 3.3LKA24DE, VG33E, VG33ER

Customer Questions & Answers

Q:
I would like to verify that part given Posted by NissanPartsDeal Specialist
A:
You can Select Your Vehicle to check if 48502-3S525 fits your vehicle.
Posted by NissanPartsDeal Specialist
Q:
How to remove and install Idler Arm and Pitman Arm on Nissan Xterra? Posted by Customer
A:
To remove the tie-rod end from the steering knuckle, first remove the cotter pin and then unscrew the inner tie-rod-to-relay rod nut. Use a puller or picklefork-type balljoint separator to free the ballstud from the relay rod. Take off the nut and detach the tie-rod from the relay rod. When installing tighten nut to torque specification and use new cotter pin. Raise car up and secure it with jackstand. Remove at inner ends of tie-rods from relay rod. Detach relay rod from Pitman arm and also idler arm. Installation is done in reverse order of removal process. Loosen right front wheel lug nuts and raise vehicle. Loosen but do not remove idler arm-to-relay rod nut. Use a two jaw puller or picklefork-type balljoint separator to separate idler arm from relay rod, remove nut and idler arm-to-frame nuts and bolts, position idler arm on frame, install bolts and nuts, connect relay rod to idler arm ballstud and install nut.RAISE CAR UP AND SECURE IT WITH JACKSTANDS.Remove cotter pin; loosen nut; detach relay rod from Pitman arm; remove Pitman arm nut and washer; use either pitman Arm Puller or Two Jaw Puller to take off Pitman Arm.INSTALLATION is the REVERSE OF REMOVAL.Ensure that marks on pitman arm already correspond with those on steering gear shaft.Tighten the nut to torque specification using a brand new cotter pin.
Posted by NissanPartsDeal Specialist
Q:
How do you install the Pitman arm after removal for the 2004 Nissan Xterra? Posted by Customer
A:
Installation is the reverse of removal. Make sure the marks on the Pitman arm and steering gear shaft are aligned. Tighten the nut to the torque and use a new cotter pin.
Posted by NissanPartsDeal Specialist
Q:
How do you separate the idler arm from the relay rod for the 2002 Nissan Frontier? Posted by Customer
A:
Loosen the right front wheel lug nuts and raise the vehicle. Loosen but do not remove the idler arm-to-relay rod nut. Use a two jaw puller or picklefork-type balljoint separator to separate the idler arm from the relay rod. Remove the nut and the idler arm-to-frame nuts and bolts.
Posted by NissanPartsDeal Specialist
See expert answers on similar Idler Arm
Q:
How do you separate the tie-rod end from the steering knuckle for the 2004 Nissan Frontier? Posted by Customer
A:
Remove the cotter pin and loosen the inner tie-rod-to-relay rod nut. Use a puller or picklefork-type balljoint separator to break loose the ballstud from the relay rod. Remove the nut and detach the tie-rod from the relay rod.
Posted by NissanPartsDeal Specialist
See expert answers on similar Pitman Arm
If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Nissan Part 48502-3S525, the Right Choice

To ensure reliability, purchase Nissan part # 48502-3S525 Arm Kit-Pitman. It is sometimes referred to as Nissan Idler Arm, Nissan Pitman Arm. OEM parts are the #1 choice in terms of quality. Crafted by Nissan, they follow rigorous factory specs and go through the demanding quality control processes during manufacturing. This part fits 1998-2004 Nissan Frontier, 2000-2003 Nissan Xterra.

NissanPartsDeal.com is a leading supplier of genuine Nissan parts and accessories such as Nissan 485023S525 Arm Kit-Pitman. Welcome to our vast selection of competitively-priced genuine Nissan parts available online. Each OEM Nissan part we provide is backed by a manufacturer's warranty and is subject to a stress-free return policy. Place your order now and receive your parts quickly, shipped directly to your doorstep.

Why choose Nissan Parts Deal

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly