Nissan 11332-40U10 Engine Mounting Bracket, Rear

You can Select Your Vehicle to check if 11332-40U10 fits your vehicle.

To replace the mounts, disconnect the cable from the negative battery terminal, set the parking brake, block the rear wheels, raise the front of the vehicle, and support it securely on jackstands while removing the splash shields. Support the engine from above, then remove the through-bolts from the right-front and right-rear mounts, detach the crossmember from the vehicle, and remove the mount-to-engine bracket through-bolts. Installation is the reverse of removal, ensuring bolts are tightened to specifications only after the engine weight is back on the mounts and the jack is removed.

Installation follows the reverse order of removal, ensuring bolts are tightened to specifications only after the engine weight is back on the mounts. For the right side engine mount, support the engine from above, remove the upper engine mount bracket and through-bolt, raise the engine slightly, and remove the mount. The left side transaxle mount requires positioning a floor jack under the transaxle housing, removing the air cleaner housing and intake duct, and then removing the transaxle-to-mount bolts.