Contact Us: Live Chat or 1-888-726-6993
My Garage
My Account
My Cart
Make sure this part fits your vehicle

Nissan 13231-2Y914 Lifter-Valve

2001-2010 Nissan 132312Y914

Nissan 13231-2Y914 Lifter-Valve
  • Part Description
    Lifter-Valve
  • Lookup Code
    13231
  • Replaced By
    (MultiSupersession)
  • Manufacturer
    Nissan
  • Manufacturer's Notes
    This part is discontinued.
Customer Questions & Answers
  • Product Specifications

    BrandGenuine Nissan
    Lookup Code13231
    Manufacturer Part Number13231-2Y914
    Part DescriptionLifter-Valve
    Item Dimensions1.4 x 1.4 x 0.8 inches
    Item Weight0.40 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerNissan
    SKU13231-2Y914
    WarrantyThis genuine Nissan part is guaranteed by Nissan's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Trim & Engine Important vehicle option details
    2003-2007 Nissan 350Z350Z, Base, Enthusiast, GT, Touring, Track|6 Cyl 3.5LVQ35DE
    2009-2010 Nissan 370ZBase, Base Sport , Sport, Touring, Touring Sport |6 Cyl 3.7LVQ37VHR
    2002-2003 Nissan AltimaSE|6 Cyl 3.5LVQ35DE
    2001-2003 Nissan MaximaGLE, GXEL, SEL, SES|6 Cyl 3.5LVQ35DE
    2003-2007 Nissan MuranoS, SE, SL|6 Cyl 3.5LVQ35DE
    2001-2004 Nissan PathfinderLE, SE|6 Cyl 3.5LVQ35DE

Customer Questions & Answers

Q:
Will this part fit my car? Posted by NissanPartsDeal Specialist
A:
You can Select Your Vehicle to check if 13231-2Y914 fits your vehicle.
Posted by NissanPartsDeal Specialist
Q:
How do you remove the lifters for the 1997 Nissan Pathfinder? Posted by Customer
A:
To remove the lifters, start by removing the valve cover and rocker arm shaft assemblies. Secure the lifters with rubber bands to prevent them from falling out of the guides. Remove the lifter guide assembly and then remove the lifters from the bores one at a time, keeping them in order. Avoid laying the lifters on their side or upside down to prevent air from becoming trapped inside.
Posted by NissanPartsDeal Specialist
Q:
How should the bearing caps and bolts be installed for the 2007 Nissan Murano? Posted by Customer
A:
Install the bearing caps and bolts, tightening them hand tight before following the proper torque sequence in three steps.
Posted by NissanPartsDeal Specialist
See expert answers on similar Lash Adjuster
Q:
What should you do before proceeding with camshaft removal for the 1996 Nissan Pathfinder? Posted by Customer
A:
Always inspect the camshafts and lifters thoroughly, and check the camshaft endplay.
Posted by NissanPartsDeal Specialist
See expert answers on similar Lash Adjuster
Q:
What are the final steps of the procedure for the 1997 Nissan Pathfinder? Posted by Customer
A:
The remainder of installation is the reverse of removal. If any part of the valve train was replaced, check and adjust the valve clearance.
Posted by NissanPartsDeal Specialist
Q:
What should be examined in terms of lifter bore diameters and lifter-to-guide clearances during inspection for the 2001 Nissan Pathfinder? Posted by Customer
A:
When inspecting, examine lifter bore diameters and lifter-to-guide clearances, comparing the results to specifications. If bore wear exceeds specified limits, replace lifter guide assemblies (3.3L engines) or cylinder heads (2.4L and 3.5L engines).
Posted by NissanPartsDeal Specialist
Q:
How should the lifters be inspected for the 2008 Nissan 350Z? Posted by Customer
A:
Inspect each lifter for scuffing and check oil clearance for each camshaft journal using Plastigage, replacing components if clearance is greater than specified.
Posted by NissanPartsDeal Specialist
See expert answers on similar Lash Adjuster
Q:
What should be done with the timing chains and camshaft sprockets for the 1995 Nissan Maxima? Posted by Customer
A:
Next, remove the timing chains and camshaft sprockets. For 2004 and later models, unbolt the camshaft position sensor from the rear end of each cylinder bank if necessary, ensuring the working end of the sensor does not touch metal after removal.
Posted by NissanPartsDeal Specialist
Q:
What should be checked regarding the lifter bore diameter for the 2006 Nissan Maxima? Posted by Customer
A:
Check each lifter bore diameter and compare the results to the specifications in this Chapter. If any lifter bore is worn beyond the specified limit, the lifter guide assembly (for SOHC engines) or the cylinder head (for DOHC engines) must be replaced.
Posted by NissanPartsDeal Specialist
Q:
How can camshaft seals be replaced in-vehicle for the 2007 Nissan Maxima? Posted by Customer
A:
If only the camshaft seals are being replaced, they can be done in-vehicle by removing the timing belt and camshaft sprockets, taking care not to damage the camshaft journal.
Posted by NissanPartsDeal Specialist
See expert answers on similar Lash Adjuster
If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Nissan Part 13231-2Y914, the Right Choice

To ensure reliability, purchase Nissan part # 13231-2Y914 Lifter-Valve. It is sometimes referred to as Nissan Lash Adjuster. OEM parts are the #1 choice in terms of quality. Crafted by Nissan, they follow rigorous factory specs and go through the demanding quality control processes during manufacturing. This part fits 2002-2003 Nissan Altima, 2001-2003 Nissan Maxima, 2003-2007 Nissan Murano, 2001-2004 Nissan Pathfinder.

NissanPartsDeal.com is a leading supplier of genuine Nissan parts and accessories such as Nissan 132312Y914 Lifter-Valve. Welcome to our vast selection of competitively-priced genuine Nissan parts available online. Each OEM Nissan part we provide is backed by a manufacturer's warranty and is subject to a stress-free return policy. Place your order now and receive your parts quickly, shipped directly to your doorstep.

Why choose Nissan Parts Deal

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly