Contact Us: Live Chat or 1-888-726-6993
My Garage
My Account
My Cart
Make sure this part fits your vehicle

Nissan 13231-2Y916 Lifter-Valve

2001-2010 Nissan 132312Y916

Nissan 13231-2Y916 Lifter-Valve
  • Part Description
    Lifter-Valve
  • Lookup Code
    13231
  • Replaced By
    (MultiSupersession)
  • Manufacturer
    Nissan
  • Manufacturer's Notes
    This part is discontinued.
Customer Questions & Answers
  • Product Specifications

    BrandGenuine Nissan
    Lookup Code13231
    Manufacturer Part Number13231-2Y916
    Part DescriptionLifter-Valve
    Item Dimensions1.4 x 1.4 x 0.9 inches
    Item Weight0.20 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerNissan
    SKU13231-2Y916
    WarrantyThis genuine Nissan part is guaranteed by Nissan's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Trim & Engine Important vehicle option details
    2003-2007 Nissan 350Z350Z, Base, Enthusiast, GT, Touring, Track|6 Cyl 3.5LVQ35DE
    2009-2010 Nissan 370ZBase, Base Sport , Sport, Touring, Touring Sport |6 Cyl 3.7LVQ37VHR
    2002-2003 Nissan AltimaSE|6 Cyl 3.5LVQ35DE
    2001-2003 Nissan MaximaGLE, GXEL, SEL, SES|6 Cyl 3.5LVQ35DE
    2003-2007 Nissan MuranoS, SE, SL|6 Cyl 3.5LVQ35DE
    2001-2004 Nissan PathfinderLE, SE|6 Cyl 3.5LVQ35DE

Customer Questions & Answers

Q:
Will this part fit my car? Posted by NissanPartsDeal Specialist
A:
You can Select Your Vehicle to check if 13231-2Y916 fits your vehicle.
Posted by NissanPartsDeal Specialist
Q:
What is the first step in the camshaft removal process for the 2009 Nissan Murano? Posted by Customer
A:
Begin by removing the timing chains and camshaft sprockets, then detach the camshaft position sensor brackets from the driver's ends of the cylinder heads.
Posted by NissanPartsDeal Specialist
See expert answers on similar Lash Adjuster
Q:
How do you remove the camshafts for the 1996 Nissan Pathfinder? Posted by Customer
A:
To remove the camshafts, remove the cylinder heads and gently pry off the camshaft cover plate. Use holding lugs to secure the camshaft while loosening the retaining bolt, and remove the bolt and thrust plate. Carefully pry out the camshaft oil seal without scratching or nicking the camshaft. Pull the camshaft out of the cylinder head using a twisting motion.
Posted by NissanPartsDeal Specialist
Q:
What should you do before proceeding with camshaft removal for the 2004 Nissan Pathfinder? Posted by Customer
A:
Always inspect the camshafts and lifters thoroughly, and check the camshaft endplay.
Posted by NissanPartsDeal Specialist
See expert answers on similar Lash Adjuster
Q:
What should be examined when inspecting the camshaft bearing surfaces, and what action is required if issues are found for the 1998 Nissan Pathfinder? Posted by Customer
A:
When inspecting the camshaft bearing surfaces, carefully look for signs of damage such as pitting, score marks, galling, or abnormal wear. If any of these issues are detected, the cylinder head will require replacement.
Posted by NissanPartsDeal Specialist
Q:
What are the final steps of the procedure for the 2001 Nissan Pathfinder? Posted by Customer
A:
The remainder of installation is the reverse of removal. If any part of the valve train was replaced, check and adjust the valve clearance.
Posted by NissanPartsDeal Specialist
Q:
What should be visually inspected on the camshaft for the 2008 Nissan 350Z? Posted by Customer
A:
Visually inspect the camshaft lobes, journals, bearing caps, and lifters for wear or damage.
Posted by NissanPartsDeal Specialist
See expert answers on similar Lash Adjuster
Q:
What should be done with the timing chains and camshaft sprockets for the 2001 Nissan Maxima? Posted by Customer
A:
Next, remove the timing chains and camshaft sprockets. For 2004 and later models, unbolt the camshaft position sensor from the rear end of each cylinder bank if necessary, ensuring the working end of the sensor does not touch metal after removal.
Posted by NissanPartsDeal Specialist
Q:
What should be checked with the lifters in their bores for the 2006 Nissan Maxima? Posted by Customer
A:
With the lifter in its bore, push down on the plunger at the top; if it moves more than 0.040-inch (1 mm), air may be trapped inside.
Posted by NissanPartsDeal Specialist
See expert answers on similar Lash Adjuster
Q:
What is the final step before reassembly for the 1996 Nissan Maxima? Posted by Customer
A:
Ensure that all parts, whether new or old, have been thoroughly inspected before reassembly.
Posted by NissanPartsDeal Specialist
If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Nissan Part 13231-2Y916, the Right Choice

To ensure reliability, purchase Nissan part # 13231-2Y916 Lifter-Valve. It is sometimes referred to as Nissan Lash Adjuster. OEM parts are the #1 choice in terms of quality. Crafted by Nissan, they follow rigorous factory specs and go through the demanding quality control processes during manufacturing. This part fits 2002-2003 Nissan Altima, 2001-2003 Nissan Maxima, 2003-2007 Nissan Murano, 2001-2004 Nissan Pathfinder.

NissanPartsDeal.com is a leading supplier of genuine Nissan parts and accessories such as Nissan 132312Y916 Lifter-Valve. Welcome to our vast selection of competitively-priced genuine Nissan parts available online. Each OEM Nissan part we provide is backed by a manufacturer's warranty and is subject to a stress-free return policy. Place your order now and receive your parts quickly, shipped directly to your doorstep.

Why choose Nissan Parts Deal

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly