Nissan 39204-2Y000 Shaft-Front Drive,R

You can Select Your Vehicle to check if 39204-2Y000 fits your vehicle.

Pull out on the steering knuckle and detach the driveaxle from the hub, being careful not to pull on the brake hose. If the brake hose prevents you from pulling the knuckle out far enough, remove the caliper (without disconnecting the hose) and hang it with a piece of wire from the coil spring.

CV joint boots should be inspected periodically for damage and leaking lubricant. Torn CV joint boots must be replaced immediately to prevent damage to the joints. Boot replacement involves the removal of the driveaxle. Some auto parts stores offer "split" type replacement boots that can be installed without removing the driveaxle from the vehicle, which is a convenient alternative. However, it is recommended to remove the driveaxle and disassemble the CV joint to clean it and ensure it is free from contaminants like moisture and dirt, which can accelerate wear.