Nissan E6110-ZR40A ABSORBER Kit - Shock, Front

You can Select Your Vehicle to check if E6110-ZR40A fits your vehicle.

1. Loosen the front wheel lug nuts. 2. Raise the vehicle and support it securely on jackstands. 3. Remove the front wheels. 4. Remove the shock absorber lower and the fasteners that attach the upper end of the shock to the frame. 5. Ensure the lower shock assembly mounting bolt and the spring end are facing outward. 6. Remove the fasteners that attach the upper end of the shock to the frame. 7. Do not remove the nut from the damper shaft. 8. Turn the steering knuckle outward for clearance, then remove the shock absorber.

To check the shock absorbers, park the vehicle on level ground, turn off the engine, and set the parking brake. Push down at one corner of the vehicle and release it, noting the movement of the body. It should stop moving and come to rest in a level position within one or two bounces. If the vehicle continues to move up-and-down or fails to return to its original position, a worn or weak shock absorber is likely the reason. Repeat this check at each of the three remaining corners of the vehicle.

Support the rear axle with a floor jack placed under the axle tube closest to the shock absorber being removed.