Nissan 11320-1W410 Engine Mounting, Rear

You can Select Your Vehicle to check if 11320-1W410 fits your vehicle.

For replacement, start by disconnecting the cable from the negative terminal of the battery and setting the parking brake. Then, raise the front of the vehicle and support it securely on jackstands. Remove the splash shields from under the vehicle. Remove the engine mount-to-frame nuts, two on each side. In the engine compartment, remove the engine mount-to-engine mount bracket nut(s), one on each side. Attach an engine hoist to the top of the engine for lifting, making sure not to use a jack under the oil pan. Raise the engine slightly until the engine mount can be removed. To remove the engine mount brackets, detach the four retaining bolts securing the mount bracket to each side of the engine. Installation is the reverse of removal, applying thread locking compound to the mount nuts before tightening them to the specific torque.

Insert a large screwdriver or pry bar into the space between the transmission extension housing and the cross member and attempt to pry the transmission up slightly. It should move only a minimal amount.

If movement is noted, the engine should be lowered and the mount fasteners tightened.