Nissan 11320-7S100 Engine Mounting, Rear

You can Select Your Vehicle to check if 11320-7S100 fits your vehicle.

If the mount is cracked or torn, it needs replacement.

To check the mounts, the engine must be raised slightly to remove the weight from them. The vehicle should be securely supported on jackstands, with the engine/transmission supported from above using a hoist or three-bar support fixture. Inspect the mounts for any cracks, hardening, or separation of the rubber from the bushing, and check for relative movement between the mounts and the engine or frame using a large screwdriver or prybar. If movement is detected, lower the engine and tighten the mount fasteners.

The engine mounts are located on the passenger and driver's side, attached to the engine block and each frame rail.

Install the new mount by reversing the removal steps, ensuring all nuts and bolts are tightened securely.