Contact Us: Live Chat or 1-888-726-6993
My Garage
My Account
My Cart
Make sure this part fits your vehicle

Nissan 13231-2Y906 Lifter-Valve

2001-2010 Nissan 132312Y906

Nissan 13231-2Y906 Lifter-Valve
  • Part Description
    Lifter-Valve
  • Lookup Code
    13231
  • Replaced By
    (MultiSupersession)
  • Manufacturer
    Nissan
  • Manufacturer's Notes
    This part is discontinued.
Customer Questions & Answers
  • Product Specifications

    BrandGenuine Nissan
    Lookup Code13231
    Manufacturer Part Number13231-2Y906
    Part DescriptionLifter-Valve
    Item Dimensions1.6 x 1.6 x 0.9 inches
    Item Weight0.20 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerNissan
    SKU13231-2Y906
    WarrantyThis genuine Nissan part is guaranteed by Nissan's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Trim & Engine Important vehicle option details
    2003-2007 Nissan 350Z350Z, Base, Enthusiast, GT, Touring, Track|6 Cyl 3.5LVQ35DE
    2009-2010 Nissan 370ZBase, Base Sport , Sport, Touring, Touring Sport |6 Cyl 3.7LVQ37VHR
    2002-2003 Nissan AltimaSE|6 Cyl 3.5LVQ35DE
    2001-2003 Nissan MaximaGLE, GXEL, SEL, SES|6 Cyl 3.5LVQ35DE
    2003-2007 Nissan MuranoS, SE, SL|6 Cyl 3.5LVQ35DE
    2001-2004 Nissan PathfinderLE, SE|6 Cyl 3.5LVQ35DE

Customer Questions & Answers

Q:
Will this part fit my car? Posted by NissanPartsDeal Specialist
A:
You can Select Your Vehicle to check if 13231-2Y906 fits your vehicle.
Posted by NissanPartsDeal Specialist
Q:
How do you install the camshafts for the 1997 Nissan Pathfinder? Posted by Customer
A:
To install the camshafts, lubricate the bearing journals and lobes with moly-based engine assembly lube and carefully install them in the cylinder head. Install the camshaft thrust plate and retaining bolt, and check the camshaft endplay. If the endplay is outside the specified range, replace the thrust plate. Install the camshaft oil seal and complete the cylinder head assembly.
Posted by NissanPartsDeal Specialist
Q:
What are the initial steps for camshaft removal for the 1997 Nissan Pathfinder? Posted by Customer
A:
Disconnect the battery cable, then remove the valve cover and air intake duct.
Posted by NissanPartsDeal Specialist
See expert answers on similar Lash Adjuster
Q:
How should the outside diameter of each camshaft bearing journal and the inside diameter of the corresponding camshaft bearings be measured during inspection for the 1999 Nissan Pathfinder? Posted by Customer
A:
Measure the outside diameter of each camshaft bearing journal and the inside diameter of the corresponding camshaft bearings using appropriate measuring tools. Record these measurements for comparison.
Posted by NissanPartsDeal Specialist
Q:
How should the lifters be prepared for installation for the 1998 Nissan Pathfinder? Posted by Customer
A:
Lubricate the lifters with clean engine oil, then install the lifters and shims into their original locations.
Posted by NissanPartsDeal Specialist
Q:
What should be checked regarding camshaft runout and endplay for the 2003 Nissan 350Z? Posted by Customer
A:
Check camshaft runout and endplay, replacing the camshaft or cylinder head if limits are exceeded.
Posted by NissanPartsDeal Specialist
See expert answers on similar Lash Adjuster
Q:
What should be checked regarding the lifter bore diameter for the 2002 Nissan Maxima? Posted by Customer
A:
Check each lifter bore diameter and compare the results to the specifications in this Chapter. If any lifter bore is worn beyond the specified limit, the lifter guide assembly (for SOHC engines) or the cylinder head (for DOHC engines) must be replaced.
Posted by NissanPartsDeal Specialist
Q:
What should be done after securing the lifters for the 2005 Nissan Maxima? Posted by Customer
A:
Next, remove the lifter guide assembly and take out the lifters from the bores one at a time, keeping them in order for reinstallation.
Posted by NissanPartsDeal Specialist
See expert answers on similar Lash Adjuster
Q:
What is the procedure for cleaning and lubricating components for the 2013 Nissan Murano? Posted by Customer
A:
Clean the bearing caps and journals, then install the lifters in their original locations after lubricating them with clean engine oil.
Posted by NissanPartsDeal Specialist
See expert answers on similar Lash Adjuster
Q:
What should be done with the No. 1 bearing cap(s) for the 2008 Nissan Maxima? Posted by Customer
A:
Apply a bead of RTV sealant to the sealing surfaces of the No. 1 bearing cap(s), then install the bearing caps and bolts, tightening them hand tight before tightening the bearing cap bolts in several steps to the specified torque.
Posted by NissanPartsDeal Specialist
If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Nissan Part 13231-2Y906, the Right Choice

To ensure reliability, purchase Nissan part # 13231-2Y906 Lifter-Valve. It is sometimes referred to as Nissan Lash Adjuster. OEM parts are the #1 choice in terms of quality. Crafted by Nissan, they follow rigorous factory specs and go through the demanding quality control processes during manufacturing. This part fits 2002-2003 Nissan Altima, 2001-2003 Nissan Maxima, 2003-2007 Nissan Murano, 2001-2004 Nissan Pathfinder.

NissanPartsDeal.com is a leading supplier of genuine Nissan parts and accessories such as Nissan 132312Y906 Lifter-Valve. Welcome to our vast selection of competitively-priced genuine Nissan parts available online. Each OEM Nissan part we provide is backed by a manufacturer's warranty and is subject to a stress-free return policy. Place your order now and receive your parts quickly, shipped directly to your doorstep.

Why choose Nissan Parts Deal

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly