Contact Us: Live Chat or 1-888-726-6993
My Garage
My Account
My Cart
Make sure this part fits your vehicle

Nissan 13231-2Y910 Lifter-Valve

2001-2010 Nissan 132312Y910

Nissan 13231-2Y910 Lifter-Valve
  • Part Description
    Lifter-Valve
  • Lookup Code
    13231
  • Replaced By
    (MultiSupersession)
  • Manufacturer
    Nissan
  • Manufacturer's Notes
    This part is discontinued.
Customer Questions & Answers
  • Product Specifications

    BrandGenuine Nissan
    Lookup Code13231
    Manufacturer Part Number13231-2Y910
    Part DescriptionLifter-Valve
    Item Dimensions1.4 x 1.5 x 0.8 inches
    Item Weight0.40 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerNissan
    SKU13231-2Y910
    WarrantyThis genuine Nissan part is guaranteed by Nissan's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Trim & Engine Important vehicle option details
    2003-2007 Nissan 350Z350Z, Base, Enthusiast, GT, Touring, Track|6 Cyl 3.5LVQ35DE
    2009-2010 Nissan 370ZBase, Base Sport , Sport, Touring, Touring Sport |6 Cyl 3.7LVQ37VHR
    2002-2003 Nissan AltimaSE|6 Cyl 3.5LVQ35DE
    2001-2003 Nissan MaximaGLE, GXEL, SEL, SES|6 Cyl 3.5LVQ35DE
    2003-2007 Nissan MuranoS, SE, SL|6 Cyl 3.5LVQ35DE
    2001-2004 Nissan PathfinderLE, SE|6 Cyl 3.5LVQ35DE

Customer Questions & Answers

Q:
Will this part fit my car? Posted by NissanPartsDeal Specialist
A:
You can Select Your Vehicle to check if 13231-2Y910 fits your vehicle.
Posted by NissanPartsDeal Specialist
Q:
What steps are involved in installing the camshaft bearing caps for the 2001 Nissan Pathfinder? Posted by Customer
A:
Install the bearing caps and bolts, tightening them in a specific sequence.
Posted by NissanPartsDeal Specialist
See expert answers on similar Lash Adjuster
Q:
What should be done before installing the camshaft bearing caps for the 2000 Nissan Pathfinder? Posted by Customer
A:
Apply a bead of RTV sealant to the sealing surfaces of the No. 1 bearing cap(s) and the cylinder head. Install new O-rings on the secondary timing chain tensioner(s) and the VVT oil control orifice on the No. 1 bearing cap(s).
Posted by NissanPartsDeal Specialist
Q:
How do you remove the camshafts for the 1997 Nissan Pathfinder? Posted by Customer
A:
To remove the camshafts, remove the cylinder heads and gently pry off the camshaft cover plate. Use holding lugs to secure the camshaft while loosening the retaining bolt, and remove the bolt and thrust plate. Carefully pry out the camshaft oil seal without scratching or nicking the camshaft. Pull the camshaft out of the cylinder head using a twisting motion.
Posted by NissanPartsDeal Specialist
Q:
What should be examined in terms of lifter bore diameters and lifter-to-guide clearances during inspection for the 2003 Nissan Pathfinder? Posted by Customer
A:
When inspecting, examine lifter bore diameters and lifter-to-guide clearances, comparing the results to specifications. If bore wear exceeds specified limits, replace lifter guide assemblies (3.3L engines) or cylinder heads (2.4L and 3.5L engines).
Posted by NissanPartsDeal Specialist
Q:
How should the bearing caps and bolts be installed for the 2006 Nissan Murano? Posted by Customer
A:
Install the bearing caps and bolts, tightening them hand tight before following the proper torque sequence in three steps.
Posted by NissanPartsDeal Specialist
See expert answers on similar Lash Adjuster
Q:
What needs to be done with the camshaft position sensors for the 2006 Nissan 350Z? Posted by Customer
A:
Disconnect the electrical connectors at the camshaft position sensors and remove the sensors.
Posted by NissanPartsDeal Specialist
See expert answers on similar Lash Adjuster
Q:
What should be inspected on the 2005 Nissan Maxima regarding rocker arms? Posted by Customer
A:
On SOHC engines, inspect the rocker arms and shafts. If the pads are worn, the rocker arms must be replaced. Do not attempt to restore rocker arms by grinding the pad surfaces.
Posted by NissanPartsDeal Specialist
Q:
What should be done while the lifters are out for the 1997 Nissan Maxima? Posted by Customer
A:
Inspect the lifters for wear, and during installation, lubricate each lifter with clean engine oil.
Posted by NissanPartsDeal Specialist
See expert answers on similar Lash Adjuster
Q:
What should be done after removing the bearing caps and camshafts for the 1998 Nissan Maxima? Posted by Customer
A:
Remove the bearing caps and camshafts, noting the camshaft markings for correct installation. Remove the lifters and shims from the cylinder head, keeping the proper shim with each lifter and maintaining their order for reinstallation.
Posted by NissanPartsDeal Specialist
If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Nissan Part 13231-2Y910, the Right Choice

To ensure reliability, purchase Nissan part # 13231-2Y910 Lifter-Valve. It is sometimes referred to as Nissan Lash Adjuster. OEM parts are the #1 choice in terms of quality. Crafted by Nissan, they follow rigorous factory specs and go through the demanding quality control processes during manufacturing. This part fits 2002-2003 Nissan Altima, 2001-2003 Nissan Maxima, 2003-2007 Nissan Murano, 2001-2004 Nissan Pathfinder.

NissanPartsDeal.com is a leading supplier of genuine Nissan parts and accessories such as Nissan 132312Y910 Lifter-Valve. Welcome to our vast selection of competitively-priced genuine Nissan parts available online. Each OEM Nissan part we provide is backed by a manufacturer's warranty and is subject to a stress-free return policy. Place your order now and receive your parts quickly, shipped directly to your doorstep.

Why choose Nissan Parts Deal

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly