Nissan 41060-40F90 Disc Brake Pad Kit

You can Select Your Vehicle to check if 41060-40F90 fits your vehicle.

1. Raise the vehicle securely and remove the rear wheel. 2. Take out the two pin bolts and lock spring to suspend the caliper above the disc. 3. Remove the pad retainers, pads, and shims, ensuring not to depress the brake pedal while the cylinder body is raised to avoid the piston popping out. 4. Check the fluid level in the master cylinder and use a syringe to remove excess fluid if necessary. 5. Press the caliper piston back in by turning it clockwise to accommodate the new pads. 6. Install the new pads with new shims in reverse order. 7. Torque the caliper pin bolts to 16-23 ft. lbs. 8. Bleed the brakes if needed, ensuring to pump the brakes for a firm pedal before driving.

When replacing pads, inspect the rotor surfaces for scoring or wear. If the rotors are badly scored, they should be removed for resurfacing.