How to replace the front crankshaft seal on an engine on Nissan Frontier?

Remove the crankshaft pulley from the engine. Carefully pry the seal out of the cover with a seal removal tool or a large screwdriver, being careful not to nick or gouge the seal bore or the crankshaft. Be careful not to scratch, gouge or distort the area that the seal fits into or an oil leak will develop. Clean the bore to remove any old seal material and corrosion. Position the new seal in the bore with the seal lip (usually the side with the spring) facing IN (toward the engine). A small amount of oil applied to the outer edge of the new seal will make installation easier. Drive the seal into the bore with a seal driver or a large socket and hammer until it's completely seated. Select a socket that's the same outside diameter as the seal and make sure the new seal is pressed into place until it bottoms against the cover flange. Check the surface of the damper that the oil seal rides on. If the surface has been grooved from long-time contact with the seal, a press-on sleeve may be available to renew the sealing surface. This sleeve is pressed into place with a hammer and a block of wood and is commonly available from most auto parts stores. Lubricate the seal lips with engine oil and reinstall the crankshaft pulley. Install the crankshaft pulley retaining bolt and tighten it to the specific torque. The remainder of installation is the reverse of the removal. Run the engine and check for oil leaks.

Genuine Nissan Frontier Crankshaft Seal

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

16 Crankshaft Seals found

View related parts
Nissan Frontier Seal-Oil,Crankshaft Front
Part Number: 13510-7Y000
$21.11 MSRP: $29.82
You Save: $8.71 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Position: Front
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2005-2019 Nissan Frontier | LE, Off-Road, PRO-4X, S, SE, SL, SV | 6 Cyl 4.0L | VQ40DE
View related parts
Nissan Frontier Seal-Oil CRANKSHAFT Front
Part Number: 13510-0Z400
$10.89 MSRP: $15.38
You Save: $4.49 (30%)
ADD TO CART
Product Specifications
- Other Name: Seal-Oil,Crankshaft Front
- Manufacturer Note: NDK
- Position: Front
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2001-2019 Nissan Frontier | S, SE, SV, XE | 4 Cyl 2.4L, 4 Cyl 2.5L | KA24DE, QR25DE
View related parts
Nissan Frontier Seal-Oil,Crankshaft Front
Part Number: 13510-9HP0A
$15.79 MSRP: $21.05
You Save: $5.26 (25%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Position: Front
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2020-2024 Nissan Frontier | PRO-4X, PRO-X, S, SV | 6 Cyl 3.8 L GAS
View related parts
Nissan Frontier Seal-Oil,CRANKSHAFT Rear
Part Number: 12279-3TS0A
$37.94 MSRP: $55.97
You Save: $18.03 (33%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Crankshaft Seal, Rear Main Seal, Seal
- Position: Rear
- Replaces: 12279-1LA0A, 12279-AD200, 12279-3TA0A
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2012-2018 Nissan Frontier | PRO-4X, S, SL, SV | 4 Cyl 2.5L, 6 Cyl 4.0L | QR25DE, VQ40DE
View related parts
Nissan Frontier Seal-Oil,CRANKSHAFT Rear
Part Number: 12279-4Z001
$30.93 MSRP: $45.62
You Save: $14.69 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rear Main Seal, Seal
- Position: Rear
- Replaces: 12279-4Z000
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2001-2019 Nissan Frontier | LE, Off-Road, PRO-4X, S, SC, SE, SL, SV, XE | 4 Cyl 2.5L, 6 Cyl 3.3L, 6 Cyl 4.0L | QR25DE, VG33E, VQ40DE
View related parts
Nissan Frontier Seal-Oil,CRANKSHAFT Rear
Part Number: 12279-2B500
$32.43 MSRP: $47.83
You Save: $15.40 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Rear Main Seal
- Position: Rear
- Replaces: 12279-58S00, 12279-21000, 12279-85G00, 12279-01M00, 12279-A4600, 12279-R4600, 12279-2B501, 12279-42L00, 12279-21010, 12279-R4601
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 1998-2004 Nissan Frontier | SE, STD, XE | 4 Cyl 2.4L | KA24DE
View related parts
Nissan Frontier Seal-Oil,Crankshaft Front
Part Number: 13510-10Y10
$10.82 MSRP: $15.28
You Save: $4.46 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Position: Front
- Replaced by: 13510-10Y12
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 1998-2002 Nissan Frontier | SC, SE, XE | 6 Cyl 3.3L | VG33E
View related parts
Nissan Frontier Seal-Oil,Crankshaft Front
Part Number: 13510-53J01
$12.01 MSRP: $16.02
You Save: $4.01 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Position: Front
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 1998-2002 Nissan Frontier | SE, STD, XE | 4 Cyl 2.4L | KA24DE
View related parts
Nissan Frontier RETAINER-Oil
Part Number: 12297-F6500
$37.34 MSRP: $49.78
You Save: $12.44 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Retainer-Oil Seal,Rear; Rear Main Seal, Rear Main Seal Retainer
- Replaces: 12296-V5000, 12297-V5000
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 1998-2004 Nissan Frontier | SC, SE, XE | 6 Cyl 3.3L | VG33E
View related parts
Nissan Frontier Oil Seal-Crank
Part Number: 12279-3TA0A
$39.89 MSRP: $55.97
You Save: $16.08 (29%)
ADD TO CART
Product Specifications
- Other Name: Seal-Oil,CRANKSHAFT Rear
- Manufacturer Note: MADE IN USA
- Position: Rear
- Replaced by: 12279-3TS0A
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2012-2015 Nissan Frontier | PRO-4X, S, SL, SV | 4 Cyl 2.5L, 6 Cyl 4.0L | QR25DE, VQ40DE
View related parts
Nissan Frontier Oil Seal-Crank
Part Number: 12279-3TA1A
$37.98 MSRP: $56.02
You Save: $18.04 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal-Oil,CRANKSHAFT Rear; Rear Main Seal
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2017-2022 Nissan Frontier | PRO-4X, PRO-X, S, SL, SV | 6 Cyl 3.8 L GAS, 6 Cyl 4.0L | VQ40DE
View related parts
Nissan Frontier Seal-Oil,CRANKSHAFT Rear
Part Number: 12279-18V00
$33.02 MSRP: $48.72
You Save: $15.70 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Position: Rear
- Replaced by: 12279-AD205
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 1999-2002 Nissan Frontier | SC, SE, XE | 6 Cyl 3.3L | VG33E
View related parts
Nissan Frontier Seal-Oil,Crankshaft Front
Part Number: 13510-2J200
$11.07 MSRP: $15.63
You Save: $4.56 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Position: Front
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2004 Nissan Frontier | XE | 4 Cyl 2.4L | KA24DE
View related parts
Nissan Frontier Oil Seal-Crank
Part Number: 12279-2B501
$34.10 MSRP: $47.83
You Save: $13.73 (29%)
ADD TO CART
Product Specifications
- Other Name: Seal-Oil,CRANKSHAFT Rear; Rear Main Seal
- Replaced by: 12279-2B500
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2001-2004 Nissan Frontier | XE | 4 Cyl 2.4L | KA24DE
View related parts
Nissan Frontier Seal-Oil, CRANKSHAFT Rear
Part Number: 12279-55Y00
$31.36 MSRP: $46.25
You Save: $14.89 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal-Oil,CRANKSHAFT Rear; Oil Seal, Rear Main Seal
- Position: Rear
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 1998-2000 Nissan Frontier | SE, XE | 6 Cyl 3.3L | VG33E
View related parts
Nissan Frontier RETAINER Assembly-Oil Seal, Rear
Part Number: 12297-F4000
$59.91 MSRP: $79.88
You Save: $19.97 (25%)
ADD TO CART
Limited Availability
Product Specifications
- Other Name: Retainer-Oil Seal,Rear
- Position: Rear
- Replaced by: 12297-86G00
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 1998-2004 Nissan Frontier | SE, STD, XE | 4 Cyl 2.4L | KA24DE

Nissan Frontier Crankshaft Seal

If you need any OEM Nissan Frontier Crankshaft Seal, feel free to choose them out of our huge selection of genuine Nissan Frontier Crankshaft Seal. All our parts are offered at unbeatable prices and are supported by the manufacturer's warranty. In addition, we offer quick shipping to have your parts delivered to your door step in a matter of days.

Nissan Frontier Crankshaft Seal Parts Questions & Experts Answers

Seal-Oil,Crankshaft Front
13510-53J01
Q: How to replace the front crankshaft seal on an engine on Nissan Frontier?
A: Remove the Crankshaft Pulley from the engine. Carefully pry the seal out of the cover with a seal removal tool or a large screwdriver, being careful not to nick or gouge the seal bore or the crankshaft. Be careful not to scratch, gouge or distort the area that the seal fits into or an oil leak will develop. Clean the bore to remove any old seal material and corrosion. Position the new seal in the bore with the seal lip (usually the side with the spring) facing IN (toward the engine). A small amount of oil applied to the outer edge of the new seal will make installation easier. Drive the seal into the bore with a seal driver or a large socket and hammer until it's completely seated. Select a socket that's the same outside diameter as the seal and make sure the new seal is pressed into place until it bottoms against the cover flange. Check the surface of the damper that the oil seal rides on. If the surface has been grooved from long-time contact with the seal, a press-on sleeve may be available to renew the sealing surface. This sleeve is pressed into place with a hammer and a block of wood and is commonly available from most auto parts stores. Lubricate the seal lips with engine oil and reinstall the crankshaft pulley. Install the crankshaft pulley retaining bolt and tighten it to the specific torque. The remainder of installation is the reverse of the removal. Run the engine and check for oil leaks.