How do you replace brake pads and ensure proper brake function on Nissan Maxima?

Remove the cap from the brake fluid reservoir and extract about two-thirds of the fluid. Loosen the lug nuts on the front or rear wheels, raise the vehicle securely on jackstands, and block the wheels at the opposite end. Remove the wheels and work on one brake assembly at a time, using the assembled brake for reference if needed. Inspect the brake disc carefully; if machining is necessary, remove the disc to also take out the pads. For replacing front brake pads, wash the brake with cleaner and let it dry, positioning a drain pan underneath to catch residue, avoiding the use of compressed air. Use a C-clamp to depress the piston into the caliper before removing the caliper and pads. Remove the lower caliper mounting bolt, leaving the upper bolt unless complete removal is required. Pivot the caliper up for access to the brake pads, and on 1995 and later models, remove the anti-rattle springs. Remove the inner and outer brake pads, along with the upper and lower pad retainers and shims. Clean and inspect the caliper pin, lubricate it with high-temperature grease, and reinstall it. Install the shims on the pads, apply anti-squeal compound to the back of both pads, and let it set before installing. Install the upper and lower pad retainers, the inner brake pad (with the wear indicator), the outer brake pad, and the anti-rattle springs for later models. Swing the caliper down over the pads and install the lower mounting bolt, tightening it to the specified torque. For rear brake pads, clean the assembly, remove the parking brake cable clip, and unhook the cable. Unscrew the upper caliper bolt, pivot the caliper out, and remove the inner and outer pads along with the pad retainers and anti-rattle spring, inspecting for damage. Lubricate the caliper pin and reinstall it, then install the shims and apply anti-squeal compound to the pads. Install the outer and inner pads, ensuring the piston is retracted properly. Swing the caliper back into position and tighten the mounting bolt to the specified torque. After completing the job, firmly depress the brake pedal several times to bring the pads into contact with the disc, check the brake fluid level, and add if necessary, ensuring the brakes operate correctly before returning the vehicle to normal service.

Genuine Nissan Maxima Brake Pad Set

Disc Brake Pad Set

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

47 Brake Pad Sets found

View related parts
Nissan Maxima Rear Brake Pad Disc Kit
Part Number: D4060-9HM0B
$69.03 MSRP: $105.00
You Save: $35.97 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad Kit-Disc Brake,Rear; Brake Pad, Rear Pad
- Position: Rear
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2013-2014 Nissan Maxima | LE, Premium, S, Sport, SR, SV | 6 Cyl 3.5L | VQ35DE
View related parts
Nissan Maxima Disc Brake Pad Kit
Part Number: D1060-9DJ0A
$72.31 MSRP: $110.00
You Save: $37.69 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad Kit-Disc Brake; Brake Pad, Front Pad
- Position: Front
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2018-2020 Nissan Maxima | Platinum, Platinum Reserve, S, SL, SR, SV | 6 Cyl 3.5 L GAS, 6 Cyl 3.5L | VQ35DE
View related parts
Nissan Maxima Rear Brake Pads Kit
Part Number: D4060-9HM0C
$72.31 MSRP: $110.00
You Save: $37.69 (35%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad Kit-Disc Brake,Rear; Brake Pad, Rear Pad
- Position: Rear
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2016-2019 Nissan Maxima | Platinum, S, SL, SR, SV | 6 Cyl 3.5L | VQ35DE
View related parts
Nissan Maxima Rear Brake Pad Disc Kit
Part Number: 44060-CB10J
$69.70 MSRP: $110.00
You Save: $40.30 (37%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Pad Kit-Disc Brake,Rear
- Position: Rear
- Replaced by: D4060-CB10J
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2005-2008 Nissan Maxima | SE, SL | 6 Cyl 3.5L | VQ35DE
View related parts
Nissan Maxima Front Brake Pads Kit
Part Number: 41060-2Y990
$69.03 MSRP: $105.00
You Save: $35.97 (35%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad Kit-Disc Brake,Front
- Position: Front
- Replaced by: D1060-EM30C
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2000-2002 Nissan Maxima | GLE, GXE, GXEL, SE, SES | 6 Cyl 3.0L | VQ30DE
View related parts
Nissan Maxima Rear Brake Pads Kit
Part Number: 44060-AL586
$72.31 MSRP: $110.00
You Save: $37.69 (35%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad Kit-Disc Brake,Rear
- Position: Rear
- Replaced by: D4060-CB10J
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2004-2006 Nissan Maxima | SE, SL | 6 Cyl 3.5L | VQ35DE
View related parts
Nissan Maxima Disc Brake Pads Kit
Part Number: 44060-4U092
$69.03 MSRP: $105.00
You Save: $35.97 (35%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad Kit-Disc Brake,Rear
- Position: Rear
- Replaced by: D4060-4U092
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2001-2003 Nissan Maxima | GLE, GXEL, SEL, SES | 6 Cyl 3.5L | VQ35DE
View related parts
Nissan Maxima Rear Brake Pads Kit
Part Number: 44060-AL585
$72.31 MSRP: $110.00
You Save: $37.69 (35%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad Kit-Disc Brake,Rear
- Position: Rear
- Replaced by: D4060-CB10J
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2004 Nissan Maxima | SE, SL | 6 Cyl 3.5L | VQ35DE
View related parts
Nissan Maxima Disc Brake Pad Kit
Part Number: D4060-9DJ0A
$72.31 MSRP: $110.00
You Save: $37.69 (35%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad Kit-Disc Br; Brake Pad, Rear Pad
- Position: Rear
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2018-2020 Nissan Maxima | Platinum, Platinum Reserve, S, SL, SR, SV | 6 Cyl 3.5 L GAS, 6 Cyl 3.5L | VQ35DE
View related parts
Nissan Maxima Front Brake Pads Kit
Part Number: 41060-5Y790
$69.03 MSRP: $105.00
You Save: $35.97 (35%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad Kit-Disc Brake,Front
- Position: Front
- Replaced by: D1060-EM30C
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2001-2003 Nissan Maxima | GLE, GXEL, SEL, SES | 6 Cyl 3.5L | VQ35DE
View related parts
Nissan Maxima Rear Disc Brake Pad Kit
Part Number: 44060-4U090
$72.31 MSRP: $110.00
You Save: $37.69 (35%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad Kit-Disc Brake,Rear
- Position: Rear
- Replaced by: D4060-7E690
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 1999-2001 Nissan Maxima | GLE, GXE, GXEL, SE, SES | 6 Cyl 3.0L | VQ30DE
View related parts
Nissan Maxima Rear Brake Pads Kit
Part Number: 44060-7E690
$72.31 MSRP: $110.00
You Save: $37.69 (35%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad Kit-Disc Brake,Rear; Rear Pads
- Position: Rear
- Replaced by: D4060-7E690
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 1995-1999 Nissan Maxima | GLE, GXE, SE | 6 Cyl 3.0L | VQ30DE
View related parts
Nissan Maxima Front Brake Pads Kit
Part Number: 41060-2Y091
$69.03 MSRP: $105.00
You Save: $35.97 (35%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad Kit-Disc Brake,Front
- Position: Front
- Replaced by: D1060-EM30C
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2000-2001 Nissan Maxima | GLE, GXE, GXEL, SE, SES | 6 Cyl 3.0L | VQ30DE
View related parts
Nissan Maxima Front Brake Pads Kit
Part Number: 41060-CA092
$72.31 MSRP: $110.00
You Save: $37.69 (35%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad Kit-Disc Brake,Front
- Position: Front
- Replaced by: D1060-CA093
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2004-2006 Nissan Maxima | SE, SL | 6 Cyl 3.5L | VQ35DE
View related parts
Nissan Maxima Front Brake Pads Kit
Part Number: 41060-ZA525
$72.31 MSRP: $110.00
You Save: $37.69 (35%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad Kit-Disc Brake,Front
- Position: Front
- Replaced by: D1060-CA093
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2004-2008 Nissan Maxima | SE, SL | 6 Cyl 3.5L | VQ35DE
View related parts
Nissan Maxima Pad Kit - Disc Brake
Part Number: D1060-9DL0A
$72.31 MSRP: $110.00
You Save: $37.69 (35%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Brake Pad, Front Pad
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2021-2023 Nissan Maxima | 40th Anniversary Edition, Platinum, SR, SV | 6 Cyl 3.5 L GAS
View related parts
Nissan Maxima Pad Kit-Disc Br
Part Number: D4060-9DL0B
$72.31 MSRP: $110.00
You Save: $37.69 (35%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Brake Pad, Rear Pad
- Replaces: D4060-9DL0A
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2021-2023 Nissan Maxima | 40th Anniversary Edition, Platinum, SR, SV | 6 Cyl 3.5 L GAS
View related parts
Nissan Maxima Disc Brake Pad
Part Number: 41060-AU091
$77.45 MSRP: $106.68
You Save: $29.23 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad Kit-Disc Brake,Front. This item subject to a 40% restocking fee if returned.; Brake Pad
- Position: Front
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2001-2002 Nissan Maxima | GLE, GXEL, SEL, SES | 6 Cyl 3.5L | VQ35DE
View related parts
Nissan Maxima Disc Brake Pad Kit
Part Number: 44060-65E90
$55.40 MSRP: $73.87
You Save: $18.47 (25%)
ADD TO CART
Limited Availability
Product Specifications
- Other Name: Pad Dsc Brake ; Pad Kit-Disc Brake; Rear Pad, Shoe
- Manufacturer Note: F/ANTI SKID CONT-4WHEEL
- Replaces: 44060-D3590AS, 44060-08E91, 44060-86E90AS, 44060-61E90, 44060-D3590, 44060-61E94AS
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 1985-1991 Nissan Maxima | DX, GXE, SE, SL/GL | 6 Cyl 3.0L | VG30E
View related parts
Nissan Maxima Front Brake Pads Kit
Part Number: 41060-40U90
$72.58 MSRP: $105.00
You Save: $32.42 (31%)
ADD TO CART
Product Specifications
- Other Name: Pad Kit-Disc Brake,Front
- Position: Front
- Replaced by: DA06M-2Y991
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 1995-1996 Nissan Maxima | GLE, GXE, SE | 6 Cyl 3.0L | VQ30DE

| Page 1 of 3 |Next >

1-20 of 47 Results

Nissan Maxima Brake Pad Set

If you need any OEM Nissan Maxima Brake Pad Set, feel free to choose them out of our huge selection of genuine Nissan Maxima Brake Pad Set. All our parts are offered at unbeatable prices and are supported by the manufacturer's warranty. In addition, we offer quick shipping to have your parts delivered to your door step in a matter of days.

Nissan Maxima Brake Pad Set Parts Questions & Experts Answers

Front Brake Pads Kit
41060-2Y091
Q: How do you replace brake pads and ensure proper brake function on Nissan Maxima?
A: Remove the cap from the brake fluid reservoir and extract about two-thirds of the fluid. Loosen the lug nuts on the front or rear wheels, raise the vehicle securely on jackstands, and block the wheels at the opposite end. Remove the wheels and work on one brake assembly at a time, using the assembled brake for reference if needed. Inspect the Brake Disc carefully; if machining is necessary, remove the disc to also take out the pads. For replacing front brake pads, wash the brake with cleaner and let it dry, positioning a drain pan underneath to catch residue, avoiding the use of compressed air. Use a C-clamp to depress the piston into the caliper before removing the caliper and pads. Remove the lower caliper mounting bolt, leaving the upper bolt unless complete removal is required. Pivot the caliper up for access to the brake pads, and on 1995 and later models, remove the anti-rattle springs. Remove the inner and outer brake pads, along with the upper and lower pad retainers and shims. Clean and inspect the caliper pin, lubricate it with high-temperature grease, and reinstall it. Install the shims on the pads, apply anti-squeal compound to the back of both pads, and let it set before installing. Install the upper and lower pad retainers, the inner brake pad (with the wear indicator), the outer brake pad, and the anti-rattle springs for later models. Swing the caliper down over the pads and install the lower mounting bolt, tightening it to the specified torque. For rear brake pads, clean the assembly, remove the parking brake cable clip, and unhook the cable. Unscrew the upper caliper bolt, pivot the caliper out, and remove the inner and outer pads along with the pad retainers and anti-rattle spring, inspecting for damage. Lubricate the caliper pin and reinstall it, then install the shims and apply anti-squeal compound to the pads. Install the outer and inner pads, ensuring the piston is retracted properly. Swing the caliper back into position and tighten the mounting bolt to the specified torque. After completing the job, firmly depress the brake pedal several times to bring the pads into contact with the disc, check the brake fluid level, and add if necessary, ensuring the brakes operate correctly before returning the vehicle to normal service.