How to the remove and install of the steering gear on Nissan Maxima?

To remove the rack and pinion, park the vehicle with the wheels straight and disconnect the negative battery cable, along with the positive cable on airbag-equipped models, waiting 10 minutes before proceeding. For 2003 and earlier models, remove the air filter housing, intake duct, and charcoal canister with its bracket. Detach the steering shaft universal joint cover from the firewall, marking the relationship of the universal joint to the rack and pinion input shaft, then remove the lower intermediate shaft pinch bolt. Avoid turning the steering wheel while the rack and pinion is removed; if it turns, center the clock spring. Secure the steering wheel with a seat belt to prevent movement. Place a drain pan under the rack and pinion, detach the power steering lines, and cap the ends. Loosen the front wheel lug nuts, raise the vehicle, and remove the wheels and engine splash shields. Separate the tie-rod ends from the steering knuckle arms, remove the stabilizer bar, and the center cross member from under the engine. Remove the rack and pinion mounting bolts, separate the intermediate shaft from the rack and pinion input shaft, and maneuver the rack and pinion assembly out. Check the rubber mounts for wear. For 2004 and later models, remove the rearward bolts from the stabilizer bar clamps, loosen the front bolts, and detach the outer ends. Follow the previous steps to access the rack and pinion mounting bolts, remove them, and take out the rack and pinion. For installation, guide the rack and pinion into position, connect the U-joint, and align the marks. For 2001 and earlier models, install the mounting clamps and bolts, tightening them in sequence, and install the shield over the right side mount. For 2002 and 2003 models, install the mounting bolts and clamp, tightening in two stages. For 2004 models, install and tighten the rack and pinion mounting bolts and stabilizer bar mounting bolts. Connect the tie-rod ends to the steering knuckle arms, install the engine splash shields, wheels, and lug nuts, then lower the vehicle and tighten the lug nuts. Install the U-joint pinch bolt and tighten it, then connect the power steering lines and fill the reservoir with the recommended fluid. Finally, install the charcoal canister and air filter housing and duct, and bleed the steering system.

Genuine Nissan Maxima Rack And Pinion

Steering Rack And Pinion

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

67 Rack And Pinions found

View related parts
Nissan Maxima Gear & Linkage
Part Number: 49001-9N00B
$1153.41 MSRP: $1510.16
You Save: $356.75 (24%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Gear & Linkage Assy-Power Steering; Gear Assembly, Steering Gear
- Replaces: 49001-9N00A
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2009-2014 Nissan Maxima | LE, Premium, S, SR, SV, Sport | 6 Cyl 3.5L | VQ35DE
View related parts
Nissan Maxima Gear & Linkage Assy-Power Steering
Part Number: 49001-4RA0A
$1090.61 MSRP: $1429.70
You Save: $339.09 (24%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Gear Assembly, Steering Gear
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2016-2023 Nissan Maxima | 40th Anniversary Edition, Platinum, Platinum Reserve, S, SL, SR, SV | 6 Cyl 3.5 L GAS, 6 Cyl 3.5L | VQ35DE
View related parts
Nissan Maxima Gear & Linkage-Power Steering
Part Number: 49001-9N00A
$1153.41 MSRP: $1510.16
You Save: $356.75 (24%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Gear & Linkage Assy-Power Steering
- Replaced by: 49001-9N00B
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2009-2012 Nissan Maxima | S, SV | 6 Cyl 3.5L | VQ35DE
View related parts
Nissan Maxima Gear & Linkage-Power Steering
Part Number: 49001-2Y903
$840.78 MSRP: $1034.80
You Save: $194.02 (19%)
ADD TO CART
Limited Availability
Product Specifications
- Other Name: Gear & Linkage Assy-Power Steering
- Replaced by: 49001-5Y700
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2000-2002 Nissan Maxima | GLE, GXE, GXEL, SE, SES | 6 Cyl 3.0L | VQ30DE
View related parts
Nissan Maxima Gear & Linkage-Power Steering
Part Number: 49001-7Y000
$883.61 MSRP: $1174.65
You Save: $291.04 (25%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Gear & Linkage Assy-Power Steering
- Replaced by: 49001-ZK30A
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2004-2005 Nissan Maxima | SE, SL | 6 Cyl 3.5L | VQ35DE
View related parts
Nissan Maxima Gear & Linkage-Power Steering
Part Number: 49001-2Y900
$840.78 MSRP: $1034.80
You Save: $194.02 (19%)
ADD TO CART
Limited Availability
Product Specifications
- Other Name: Gear & Linkage Assy-Power Steering
- Replaced by: 49001-5Y700
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2000-2001 Nissan Maxima | GLE, GXE, GXEL, SE, SES | 6 Cyl 3.0L | VQ30DE
View related parts
Nissan Maxima Gear & Linkage-Power Steering
Part Number: 49001-6Y310
$739.39 MSRP: $985.85
You Save: $246.46 (25%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Gear & Linkage Assy-Power Steering; Gear Assembly, Steering Gear
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2002-2003 Nissan Maxima | GLE, SEL, SES | 6 Cyl 3.5L | VQ35DE
View related parts
Nissan Maxima Gear & Linkage-Power Steering
Part Number: 49001-5Y715
$972.34 MSRP: $1296.45
You Save: $324.11 (25%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Gear & Linkage Assy-Power Steering; Gear Assembly, Steering Gear
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2001-2003 Nissan Maxima | GLE, SEL, SES | 6 Cyl 3.5L | VQ35DE
View related parts
Nissan Maxima Gear & Linkage
Part Number: 49001-ZK40A
$824.74 MSRP: $1096.15
You Save: $271.41 (25%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Gear & Linkage Assy-Power Steering; Gear Assembly, Steering Gear
- Replaces: 49001-ZB010, 49001-8J010
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2004-2008 Nissan Maxima | SE, SL | 6 Cyl 3.5L | VQ35DE
View related parts
Nissan Maxima Gear & Linkage - Power Steering
Part Number: 49001-ZB010
$824.74 MSRP: $1096.15
You Save: $271.41 (25%)
ADD TO CART
Product Specifications
- Other Name: Gear & Linkage Assy-Power Steering
- Replaced by: 49001-ZK40A
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2004-2007 Nissan Maxima | SE, SL | 6 Cyl 3.5L | VQ35DE
View related parts
Nissan Maxima Gear & Linkage
Part Number: 49001-ZA000
$883.61 MSRP: $1174.65
You Save: $291.04 (25%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Gear & Linkage Assy-Power Steering
- Replaced by: 49001-ZK30A
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2004-2007 Nissan Maxima | SE, SL | 6 Cyl 3.5L | VQ35DE
View related parts
Nissan Maxima Gear & Linkage
Part Number: 49001-ZK30A
$883.61 MSRP: $1174.65
You Save: $291.04 (25%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Gear & Linkage Assy-Power Steering; Gear Assembly, Steering Gear
- Replaces: 49001-7Y000, 49001-ZA000
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2004-2008 Nissan Maxima | SE, SL | 6 Cyl 3.5L | VQ35DE
View related parts
Nissan Maxima Rack & Inner Tube Power Steering
Part Number: 49270-38E06
Product Specifications
- Other Name: Rack & Inner Tube Assy-Power Steering; Rack
- Position: Inner
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 1988 Nissan Maxima | DX, SE, SL/GL | 6 Cyl 3.0L | VG30E
View related parts
Nissan Maxima TRCK & Inner Track Assembly
Part Number: 49270-16E10
Product Specifications
- Other Name: Rack & Inner Tube Assy-Power Steering; Rack
- Position: Inner
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 1985-1987 Nissan Maxima | DX, SE, SL/GL | 6 Cyl 3.0L | VG30E
View related parts
Nissan Maxima Rack & Inner Tube Assembly
Part Number: 49270-38E00
Product Specifications
- Other Name: Rack & Inner Tube Assy-Power Steering; Rack
- Position: Inner
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 1986-1988 Nissan Maxima | DX, SE, SL/GL | 6 Cyl 3.0L | VG30E
View related parts
Nissan Maxima Pinion Assy-Power Steering
Part Number: 49220-0L700
Product Specifications
- Other Name: Pinion Assembly
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 1996-1999 Nissan Maxima | SE | 6 Cyl 3.0L | VQ30DE
View related parts
Nissan Maxima Pinion Assy-Power Steering
Part Number: 49220-87E00
Product Specifications
- Other Name: Pinion, Pinion Gear
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 1989-1992 Nissan Maxima | GXE | 6 Cyl 3.0L | VG30E
View related parts
Nissan Maxima Pinion Assy-Power Steering
Part Number: 49220-40U00
Product Specifications
- Other Name: Pinion Assembly
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 1995-1999 Nissan Maxima | GLE, GXE, SE | 6 Cyl 3.0L | VQ30DE
View related parts
Nissan Maxima Rack Assy-Power Steering
Part Number: 49271-2Y900
Product Specifications
- Other Name: Rack
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2000 Nissan Maxima | GLE, GXE, GXEL, SE, SES | 6 Cyl 3.0L | VQ30DE
View related parts
Nissan Maxima Pinion Assy-Power Steering
Part Number: 49220-32A01
Product Specifications
- Other Name: Pinion, Pinion Gear
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 1985-1988 Nissan Maxima | SE | 6 Cyl 3.0L | VG30E

| Page 1 of 4 |Next >

1-20 of 67 Results

Nissan Maxima Rack And Pinion

The Nissan Maxima Rack And Pinion is a very crucial asset of the automobile and contributes immensely to the reputation of the car as a reliable car as regards its performance. This steering mechanism enables quick change of direction of the front wheels corresponding with the rotation of the steering wheel. The Nissan Maxima also known as Nissan's finest sedan has undergone some generations and the rack and pinion system also conforms to the needs of present power assisted steering which usually is hydraulic. It further refines handling characteristics for better maneuverability while also posing a general upgrade to the fun of driving. The Nissan Maxima Rack And Pinion is designed for different generations of Maxima; thus, it enlightens the drivers, and they experience the efficiency with safety measures. For instance, the straight helical gears opposed to helical gears modification improves the efficiency of the gear by lowering the operating temperature and improving the steering quality. Problems such as; fluid leaks and worn out gears can affect the efficiency of the Rack And Pinion hence a necessity to have the Maxima checked on regularly. The Nissan Maxima Rack And Pinion is one of the premier models in the context of automotive industry, because it has a very solid build; besides, many hi-tech solutions have been integrated into the car, and these make the vehicle more secure and more effective. The Nissan Maxima Rack And Pinion is a clear example of how Nissan constantly delivers the premier performing vehicle that offers not just a spectacular drive but also safety and reliability.

If you need any OEM Nissan Maxima Rack And Pinion, feel free to choose them out of our huge selection of genuine Nissan Maxima Rack And Pinion. All our parts are offered at unbeatable prices and are supported by the manufacturer's warranty. In addition, we offer quick shipping to have your parts delivered to your door step in a matter of days.

Nissan Maxima Rack And Pinion Parts Questions & Experts Answers

Gear & Linkage-Power Steering
49001-6Y310
Q: How to the remove and install of the steering gear on Nissan Maxima?
A: To remove the rack and pinion, park the vehicle with the wheels straight and disconnect the negative battery cable, along with the positive cable on airbag-equipped models, waiting 10 minutes before proceeding. For 2003 and earlier models, remove the air filter housing, intake duct, and charcoal canister with its bracket. Detach the steering shaft universal joint cover from the firewall, marking the relationship of the universal joint to the rack and pinion input shaft, then remove the lower intermediate shaft pinch bolt. Avoid turning the Steering Wheel while the rack and pinion is removed; if it turns, center the clock spring. Secure the steering wheel with a seat belt to prevent movement. Place a drain pan under the rack and pinion, detach the power steering lines, and cap the ends. Loosen the front wheel lug nuts, raise the vehicle, and remove the wheels and engine splash shields. Separate the tie-rod ends from the steering knuckle arms, remove the stabilizer bar, and the center cross member from under the engine. Remove the rack and pinion mounting bolts, separate the intermediate shaft from the rack and pinion input shaft, and maneuver the rack and pinion assembly out. Check the rubber mounts for wear. For 2004 and later models, remove the rearward bolts from the stabilizer bar clamps, loosen the front bolts, and detach the outer ends. Follow the previous steps to access the rack and pinion mounting bolts, remove them, and take out the rack and pinion. For installation, guide the rack and pinion into position, connect the U-joint, and align the marks. For 2001 and earlier models, install the mounting clamps and bolts, tightening them in sequence, and install the shield over the right side mount. For 2002 and 2003 models, install the mounting bolts and clamp, tightening in two stages. For 2004 models, install and tighten the rack and pinion mounting bolts and stabilizer bar mounting bolts. Connect the tie-rod ends to the steering knuckle arms, install the engine splash shields, wheels, and lug nuts, then lower the vehicle and tighten the lug nuts. Install the U-joint pinch bolt and tighten it, then connect the power steering lines and fill the reservoir with the recommended fluid. Finally, install the charcoal canister and air filter housing and duct, and bleed the steering system.