How should you inspect and replace rubber hoses and metal brake lines on Nissan Maxima's brake system?

About every six months, with the vehicle raised and supported securely on jackstands, inspect the rubber hoses connecting the steel brake lines with the front and rear brake assemblies for cracks, chafing, leaks, blisters, and other damage, as these are crucial parts of the brake system. A light and mirror will aid in a thorough check, and any hose showing signs of wear should be replaced. To replace a flexible brake hose, loosen the wheel lug nuts, raise the vehicle, and remove the wheel. Unscrew the brake line fitting from the hose at the bracket using a flare-nut wrench to avoid rounding off corners, then remove the U-clip from the female fitting at the bracket and pass the hose through. At the caliper end, remove the banjo bolt and separate the hose, ensuring to replace the two copper sealing washers during installation. Detach the hose from the strut bracket by removing the U-clip. For installation, pass the caliper fitting end through the strut bracket, connect it to the caliper with the banjo bolt and new copper washers, ensuring the hose isn't twisted. Route the hose into the frame bracket, connect the brake line fitting by hand, install the U-clip, and tighten securely. Afterward, bleed the brakes, install the wheel and lug nuts, lower the vehicle, and tighten the lug nuts to the specified torque. When replacing metal brake lines, use the correct steel parts and avoid copper tubing. Prefabricated brake lines with flared tube ends and installed fittings are available, but they must be bent to the proper shapes using a tubing bender. Ensure the new line is securely supported in the brackets with adequate clearance from moving or hot components. After installation, check the master cylinder fluid level, add fluid as necessary, bleed the brake system, and test the brakes carefully before driving.

Genuine Nissan Maxima Brake Line

Brake Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

80 Brake Lines found

View related parts
Nissan Maxima Hose Assy-Brake,Rear
Part Number: 46210-3TA5B
$12.64 MSRP: $18.65
You Save: $6.01 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Brake Hose, Flex Hose
- Position: Rear
- Replaces: 46210-3TA5A
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2016-2023 Nissan Maxima | 40th Anniversary Edition, Platinum, Platinum Reserve, S, SL, SR, SV | 6 Cyl 3.5 L GAS, 6 Cyl 3.5L | VQ35DE
View related parts
Nissan Maxima Hose Assy-Brake,Rear
Part Number: 46211-8J011
$11.36 MSRP: $15.15
You Save: $3.79 (26%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Brake Hose, Flex Hose
- Position: Rear
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2004-2008 Nissan Maxima | SE, SL | 6 Cyl 3.5L | VQ35DE
View related parts
Nissan Maxima Hose Assy-Brake,Front
Part Number: 46210-9N00B
$40.17 MSRP: $59.25
You Save: $19.08 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Position: Front
- Replaced by: 46210-ZX70B
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2009-2012 Nissan Maxima | S, SV | 6 Cyl 3.5L | VQ35DE
View related parts
Nissan Maxima Hose Assy-Brake,Front
Part Number: 46210-9N10B
$41.17 MSRP: $60.73
You Save: $19.56 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Position: Front
- Replaced by: 46210-ZX71B
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2009-2012 Nissan Maxima | S, SV | 6 Cyl 3.5L | VQ35DE
View related parts
Nissan Maxima Hose Brake Rear
Part Number: 46210-4Y922
$29.14 MSRP: $38.85
You Save: $9.71 (25%)
ADD TO CART
Limited Availability
Product Specifications
- Other Name: Hose Assy-Brake,Rear
- Manufacturer Note: F/SELECT USE NICHIRIN
- Position: Driver Side
- Replaced by: 46210-4Y90B
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2000-2003 Nissan Maxima | GLE, GXE, GXEL, SE, SEL, SES | 6 Cyl 3.0L, 6 Cyl 3.5L | VQ30DE, VQ35DE
View related parts
Nissan Maxima Hose Brake Rear
Part Number: 46210-4Y921
$30.65 MSRP: $40.87
You Save: $10.22 (26%)
ADD TO CART
Limited Availability
Product Specifications
- Other Name: Hose Assy-Brake,Rear
- Manufacturer Note: F/RH SELECT USE NICHIRIN
- Position: Rear
- Replaced by: 46210-4Y90A
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2000-2003 Nissan Maxima | GLE, GXE, GXEL, SE, SEL, SES | 6 Cyl 3.0L, 6 Cyl 3.5L | VQ30DE, VQ35DE
View related parts
Nissan Maxima Tube Assembly - Brake, Front RH
Part Number: 46240-3TA1B
$46.07 MSRP: $67.96
You Save: $21.89 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Tube Assy-Brake,Front RH
- Position: Passenger Side
- Replaces: 46240-3TA0A, 46240-3TA1A
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2016-2019 Nissan Maxima | S, SV | 6 Cyl 3.5L | VQ35DE
View related parts
Nissan Maxima Hose Assembly-Brake Center
Part Number: 46210-ZX71B
$43.00 MSRP: $60.73
You Save: $17.73 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assy-Brake,Front; Brake Hose, Flex Hose
- Position: Center
- Replaces: 46210-9N10B
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2009-2014 Nissan Maxima | LE, Premium, S, SR, SV, Sport | 6 Cyl 3.5L | VQ35DE
View related parts
Nissan Maxima Hose Assy-Brake,Front
Part Number: 46210-32U11
$37.46 MSRP: $49.95
You Save: $12.49 (26%)
ADD TO CART
Limited Availability
Product Specifications
- Position: Passenger Side & Driver Side
- Replaced by: 46210-4Y91E
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 1998-2001 Nissan Maxima | GLE, GXE, GXEL, SE, SES | 6 Cyl 3.0L | VQ30DE
View related parts
Nissan Maxima Hose Assembly-Brake Front
Part Number: 46211-4RA0B
$43.05 MSRP: $63.50
You Save: $20.45 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assy-Brake,Front; Brake Hose, Flex Hose
- Position: Driver Side
- Replaces: 46211-4RA0A
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2016-2023 Nissan Maxima | 40th Anniversary Edition, Platinum, Platinum Reserve, S, SL, SR, SV | 6 Cyl 3.5 L GAS, 6 Cyl 3.5L | VQ35DE
View related parts
Nissan Maxima Hose Assembly-Brake Front
Part Number: 46210-ZB51A
$43.45 MSRP: $59.85
You Save: $16.40 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assy-Brake,Front. This item subject to a 40% restocking fee if returned.; Brake Hose, Flex Hose
- Position: Driver Side
- Replaces: 46210-8J015
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2004-2008 Nissan Maxima | SE, SL | 6 Cyl 3.5L | VQ35DE
View related parts
Nissan Maxima Tube-Booster To Tank
Part Number: 47401-JA000
$16.76 MSRP: $22.35
You Save: $5.59 (26%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Tube, Vacuum Tube
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2016-2023 Nissan Maxima | 40th Anniversary Edition, Platinum, Platinum Reserve, S, SL, SR, SV | 6 Cyl 3.5 L GAS, 6 Cyl 3.5L | VQ35DE
- 2009-2014 Nissan Maxima | LE, Premium, S, SR, SV, Sport | 6 Cyl 3.5L | VQ35DE
View related parts
Nissan Maxima Hose Assembly-Brake Front LH
Part Number: 46210-D4002
$26.85 MSRP: $35.80
You Save: $8.95 (25%)
ADD TO CART
Limited Availability
Product Specifications
- Other Name: Hose Assy-Brake,Front LH
- Manufacturer Note: SELECT USE HITACHI
- Position: Driver side
- Replaced by: 46210-D4012
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 1986-1988 Nissan Maxima | DX, SE, SL/GL | 6 Cyl 3.0L | VG30E
View related parts
Nissan Maxima Hose Assy-Brake,Rear
Part Number: 46211-9N05A
$18.02 MSRP: $26.58
You Save: $8.56 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Position: Rear
- Replaced by: 46211-ZX70A
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2009-2012 Nissan Maxima | S, SV | 6 Cyl 3.5L | VQ35DE
View related parts
Nissan Maxima Hose Assy-Brake,Rear
Part Number: 46210-9N05A
$18.02 MSRP: $26.58
You Save: $8.56 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Position: Rear
- Replaced by: 46210-ZX70A
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2009-2012 Nissan Maxima | S, SV | 6 Cyl 3.5L | VQ35DE
View related parts
Nissan Maxima Hose Brake Rear
Part Number: 46210-ZX70A
$18.95 MSRP: $26.58
You Save: $7.63 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assy-Brake,Rear; Brake Hose, Flex Hose
- Position: Rear
- Replaces: 46210-9N05A
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2009-2014 Nissan Maxima | LE, Premium, S, SR, SV, Sport | 6 Cyl 3.5L | VQ35DE
View related parts
Nissan Maxima Hose Assembly-Brake, Rear
Part Number: 46211-ZX70A
$18.02 MSRP: $26.58
You Save: $8.56 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assy-Brake,Rear; Brake Hose, Flex Hose
- Position: Rear
- Replaces: 46211-9N05A
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2009-2014 Nissan Maxima | LE, Premium, S, SR, SV, Sport | 6 Cyl 3.5L | VQ35DE
View related parts
Nissan Maxima Hose Assy-Brake,Front
Part Number: 46210-4RA0B
$42.84 MSRP: $63.18
You Save: $20.34 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Brake Hose, Flex Hose
- Position: Passenger Side
- Replaces: 46210-4RA0A
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2016-2023 Nissan Maxima | 40th Anniversary Edition, Platinum, Platinum Reserve, S, SL, SR, SV | 6 Cyl 3.5 L GAS, 6 Cyl 3.5L | VQ35DE
View related parts
Nissan Maxima Tube Assy-Brake,Front RH
Part Number: 46240-4RA0A
$68.52 MSRP: $104.23
You Save: $35.71 (35%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2016-2019 Nissan Maxima | Platinum, SL, SR, SV | 6 Cyl 3.5L | VQ35DE
View related parts
Nissan Maxima Hose Assembly-Brake Front
Part Number: 46210-ZX70B
$40.17 MSRP: $59.25
You Save: $19.08 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assy-Brake,Front; Brake Hose, Flex Hose
- Position: Front
- Replaces: 46210-9N00B
- Warranty: This genuine part is guaranteed by Nissan's factory warranty.
Fits the following Vehicles:
- 2009-2014 Nissan Maxima | LE, Premium, S, SR, SV, Sport | 6 Cyl 3.5L | VQ35DE

| Page 1 of 4 |Next >

1-20 of 80 Results

Nissan Maxima Brake Line

If you need any OEM Nissan Maxima Brake Line, feel free to choose them out of our huge selection of genuine Nissan Maxima Brake Line. All our parts are offered at unbeatable prices and are supported by the manufacturer's warranty. In addition, we offer quick shipping to have your parts delivered to your door step in a matter of days.

Nissan Maxima Brake Line Parts Questions & Experts Answers

Hose Assy-Brake,Rear
46211-8J011
Q: How should you inspect and replace rubber hoses and metal brake lines on Nissan Maxima's brake system?
A: About every six months, with the vehicle raised and supported securely on jackstands, inspect the rubber hoses connecting the steel brake lines with the front and rear brake assemblies for cracks, chafing, leaks, blisters, and other damage, as these are crucial parts of the brake system. A light and mirror will aid in a thorough check, and any hose showing signs of wear should be replaced. To replace a flexible brake hose, loosen the wheel lug nuts, raise the vehicle, and remove the wheel. Unscrew the brake line fitting from the hose at the bracket using a flare-nut wrench to avoid rounding off corners, then remove the U-clip from the female fitting at the bracket and pass the hose through. At the caliper end, remove the banjo bolt and separate the hose, ensuring to replace the two copper sealing washers during installation. Detach the hose from the strut bracket by removing the U-clip. For installation, pass the caliper fitting end through the strut bracket, connect it to the caliper with the banjo bolt and new copper washers, ensuring the hose isn't twisted. Route the hose into the frame bracket, connect the brake line fitting by hand, install the U-clip, and tighten securely. Afterward, bleed the brakes, install the wheel and lug nuts, lower the vehicle, and tighten the lug nuts to the specified torque. When replacing metal brake lines, use the correct steel parts and avoid copper tubing. Prefabricated brake lines with flared tube ends and installed fittings are available, but they must be bent to the proper shapes using a tubing bender. Ensure the new line is securely supported in the brackets with adequate clearance from moving or hot components. After installation, check the master cylinder fluid level, add fluid as necessary, bleed the brake system, and test the brakes carefully before driving.